|
#2
|
||||
|
||||
Last edited by Arn0; 15-10-2009 at 09:55 PM. Reason: link renewed |
#3
|
||||
|
||||
Anyone got a setup for the WE for southport??....
Just bought one *feels faint!!!* |
#4
|
||||
|
||||
I cant tell you my setup (pretty much same as stu woods) since I dont have the car with me.. but the shocks are
front: blue spring #3 piston 30wt oil inside on tower outside on wishbone rear: green spring #1 piston 25wt oil inside on tower and wishbone I think 3 washers under the rear ball stud to lower it. Thats all I can remember! hehe.. the car was superb. |
#5
|
|||
|
|||
rear camberlink
3 washers under rear stud inside on hub short wheelbase front camberlink 3.5 washers outside 2 or 3 washers inside on the outer topdeck hole steering rack: forward hole 3 washers inside 1 outside i needed to use a 0.060 limiter inside the rear shocks and an o-ring outside allround to stop the driveshafts hitting the outdrives oneways can be used but that is down to personal choice |
#6
|
||||
|
||||
i tried all three drive types for the review. fixed, centre one way and front one way. they were progressively harder to drive and progressively faster on the track.
To my surprise the car was really good as it comes with full time 4wd |
#7
|
||||
|
||||
Quote:
|
#9
|
|||
|
|||
i got a metric washer somat like 4 / 5mm you'd need to measure one of the kit ballstud washers then figure out which
|
#10
|
|||
|
|||
Kit ballstud washer is about 0.75mm
I have found that if I run any more than three washers with the kit ballstuds, on the inner camber links, there is no thread left to fasten the nut to. |
#12
|
||||
|
||||
ill let you all have a really nice 2wd set up tomorrow, i hope we are going to test at bury Saturday, lol u no the car i mean hehehehe be with me tomorrow hehehehe
__________________
Mattys the driver,my names carl
|
#13
|
||||
|
||||
so will a nice fat receipt asking for money from customs
is this bury thing a regular day now? |
#14
|
||||
|
||||
mr nice customs type chappy (you never no who reads these things) i have to edge my bets
not to bad £50-70 for three cars is what im expecting any way still under £160 mark beets the £199 expected uk price would love saturday at burt to become a regular thing
__________________
Mattys the driver,my names carl
Last edited by bigred5765; 03-07-2006 at 08:07 PM. |
#16
|
||||
|
||||
come on then jim give us the full stu wood setup....
I need to get some more washers by the sounds of it... so do i need to find 0.015" ones? The way i had it while testin it yesterday seemed quite good, but theres always room for improvement :-D |
#17
|
||||
|
||||
tbh with you mate, between you and me like. Whilst stu wood can tell the diff with that .0015000000 washer on there - we probably never could ! lol
I will have a look for a setup sheet and write it down for you when i get a second mate.. |
#18
|
||||
|
||||
Yeah was thinkin that actually...
ya can download an editable pdf from rc10b4.com ya know.. |
#19
|
||||
|
||||
Quote:
__________________
Mattys the driver,my names carl
|
#20
|
||||
|
||||
mattys set up from this year
http://www.hobbytec.co.uk/index.php?...y_view&iden=23
__________________
Mattys the driver,my names carl
|
|
|