|
#1
|
|||
|
|||
Cat SX LiPo
Does the lipo car have slots under neath the cells or is it flat carbon?
My lipos has notches on the bottom to locate into slots!! Paul |
#2
|
|||
|
|||
The lipo chassis is flat carbon and has two slots in but they provide two cf slot locators to glue onto the flat side of a Lipo. Unfortunately is seems that they have not catered for the packs (Reedy) which already have location bumps on for locating in existing cell slots.
|
#3
|
||||
|
||||
Dremel!
|
#4
|
||||
|
||||
Couldn't you turn the Lipo over ?
__________________
Stevie Brew BW-RACING@HOTMAIL.COM http://www.oople.com/forums/showthre...hlight=stegger |
#5
|
|||
|
|||
Thanks guys will have to come up with a solution to that, i think dremel sounds a good one!!
Paul |
#6
|
||||
|
||||
Really
__________________
KECKSpeed - Seat of your Pants R/C Racing www.keckspeed.co.uk ryan@keckspeed.co.uk |
#7
|
|||
|
|||
not to that car, i will sand of the humps on my lipos then stick the carbon bits too them!!
Paul |
#8
|
||||
|
||||
Can you get the bits of CF you stick to the LIPO as a spare part - I'm assuming most people have more than one pack and I can't see the part listed on their website?
|
#9
|
||||
|
||||
I haven't got the manual with me now, but have a look on the exploded diagram - that usually shows a lot of stuff like this.
|
#10
|
|||
|
|||
I cannot see the part number in my manual other than the Lipo chassis part numbers. I have also looked at the Schumacher parts list on the website and cannot see anything listed that would match these small parts.
|
#11
|
|||
|
|||
I assume that they are using the ones that they first brought out for the Mi3 - part number U3271 - Lipo Locators - £2.99 per pair (in stock if anyone needs some)
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#12
|
||||
|
||||
They are available, becuase i know people that have been using them in Mi3's for quite some time. I need to find part number as well, because i've lost the ones i had!
__________________
Matthew White |
#13
|
|||
|
|||
Ooops....... beat you to it Matt
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#14
|
||||
|
||||
You've saved me looking for Part No
__________________
Matthew White |
#15
|
||||
|
||||
Or for lipo packs with the 6cell locations lugs on the bottom you could make a new battery bar and stop the lateral movement like this
__________________
Trader feedback:-http://www.oople.com/forums/showthread.php?t=78095 It was once said to me, if you light the blue touch paper you need to stand well back[/CENTER] Last edited by sly; 25-09-2008 at 05:08 PM. Reason: spelling |
#16
|
||||
|
||||
Si, your a ledgend dude. That was something I was planning to do - you beat me to it, so I am keen to physically see your car.
|
#17
|
||||
|
||||
What pinions would you be running with a 5.5 or 6.5?
The reason I ask is that, when I have the core lipo in the car, it stops the motor from moving forwards, so you would only be able to fit a small pinion on by the looks of it. |
#18
|
||||
|
||||
Ill be playing with it on Sunday although with care as i haven`t place an order for some spares yet.
__________________
Trader feedback:-http://www.oople.com/forums/showthread.php?t=78095 It was once said to me, if you light the blue touch paper you need to stand well back[/CENTER] |
#19
|
||||
|
||||
Chris Long is running a 23t pinion with a 83t spur on a Novak 5.5R motor.
__________________
KECKSpeed - Seat of your Pants R/C Racing www.keckspeed.co.uk ryan@keckspeed.co.uk |
#20
|
|||
|
|||
Sly, where did u get the batt holders??? that wld be really useful
|
|
|