|
#1
|
||||
|
||||
gearing
ive been running my durango on carpet with foams im gearing it 23 to kit spur and the motor seems to be getin very hot . at one point the chassis was 100c and the the motor 213c . running lrp sxx tc and 6.5 x12 . my speedo settings are 1.3.2.2 . is it gearing or shall i turn the speedo down .
|
#2
|
||||
|
||||
Hi.
Sounds way too high to me. I reckon you need to be on a 20 or 21 on a 6.5 X12 type motor. I used to run 21 outdoors on the DEX 410 with long straights. So I'd try a 20 to start with. The X12 does tend to get very hot when running. Do you mean 100F and 213F. If it was 100C and 213C, I'm suprised the motor was running?
__________________
5 Time Oople Invernational SC Champion. Powered by OptiPower Do, or do not, there is no try! |
#3
|
||||
|
||||
yea f m8 . sorry . cheers adam i will try that tomorrow
|
#5
|
||||
|
||||
Goo job its not got a plastic chassis then.
|
#6
|
||||
|
||||
yea its good , heatsink chassis lovely
|
#7
|
||||
|
||||
Its going to be the best thing to have in the winter, I can see peeps overgearing, just to keep their hands warm
__________________
Model Junction, Boughton Raceway. |
|
|