|
#1
|
||||
|
||||
X6 Anti-Squat shims
X-Factory X6 / Rear Hinge Pin Anti-Squat
1 piece shims in Carbon Fibre Had some made up and been running them for over year now with out a problem. Just back out the 2 lower chassis screws, undo the 2 screws that hold the toe-in block in place and slip in or remove a new shim to adjust the anti-squat. Kit will include a shim to replace the washers under the screws that hold the toe-in blocks in place. (when using the thickest shim the washers get in the way) UK £10.50 shipped USA $23.50 shipped Europe €17.50 shipped 5 shims for anti-squat adjustment & 1 shim to replace washers used on toe-in bar (not shown) 0 deg = .150" or 3.81mm 0 deg = 3.8mm spacer or (2.3mm +1.5mm) 1 deg = .120" or 3.048mm 1 deg = 3mm spacer 2 deg = .090" or 2.286mm 2 deg = 2.3mm spacer 3 deg = .060" or 1.524mm 3 deg = 1.5mm spacer 4 deg = .030" or 0.76mm 4 deg = 1mm spacer 5 deg = no shims UK based in the North East. Have been racing since 1993 BRCA licence holder PM or email if you want to get hold of some (add X6 Anti-Squat Shimz to the subject line in email) send payment to paypal @ chequeredflagracing@ntlworld.com |
#2
|
||||
|
||||
What are they made of????
If they are required do we PM you ?? |
#3
|
||||
|
||||
Quote:
made from Carbon Fibre pm or email please for how to pay if anyone would like a set |
#4
|
||||
|
||||
Sorry i think it was me had one to many Largers i can now see Carbon Fibre & Pm or email
|
#5
|
||||
|
||||
Oh yer whats the delivery time expected ? Cheers
|
#6
|
||||
|
||||
these r instead of the lil plastic spacers arnt they?
sorry, im abit stupid wot sizes r they? how many do yoo get in a pack? thanks |
#7
|
||||
|
||||
yes to replace the 'lil plastic washers'
me to as I've missed out some info 5 shims for anti-squat adjustment & 1 shim to replace washers used on toe-in bar. (see 1st post) 0 deg = .150" or 3.81mm 0 deg = 3.8mm spacer or (2.3mm +1.5mm) 1 deg = .120" or 3.048mm 1 deg = 3mm spacer 2 deg = .090" or 2.286mm 2 deg = 2.3mm spacer 3 deg = .060" or 1.524mm 3 deg = 1.5mm spacer 4 deg = .030" or 0.76mm 4 deg = 1mm spacer 5 deg = no shims working on getting 0.75mm carbon to get as close to 4 deg as possible |
#8
|
||||
|
||||
also, where do yoo race? if i were to buy, i might be able to get track side, thanks |
#9
|
||||
|
||||
|
#10
|
|||
|
|||
Any markings on each one to inform what degrees antisquat they are??
Good idea though, may have to get some off you?? E |
#11
|
||||
|
||||
Yes I like this a lot... Will you be at the indoor finals???
I think Glenn Atterton was trying to make something along these lines, is this Glen? or part of the same thing. |
#12
|
||||
|
||||
Quote:
Can't make the indoor finals though due to work. Should be some TRCC members going so may be able to have some shims @ the finals |
#13
|
||||
|
||||
check yor pms
|
#14
|
||||
|
||||
Quote:
Thought about having small holes drilled in each but would put up costs due to machine time. Will see about getting it priced though. Could included a drawing like you see for turnbuckle lengths in some instruction manuals only this would be for thickness now that's a very good idea |
#15
|
||||
|
||||
how would i be able to pay for them?
and how fast would postage be? blablabla thanks |
#16
|
||||
|
||||
|
#17
|
||||
|
||||
[chris not chriss ] lol sorry ill go back to hide in my lil corner
__________________
Matt Myers Team Associated b4 Team Associated b44 |
#18
|
||||
|
||||
Glenn,
I think these are an ace idea, I'll most likely be giving you a shout in the not to distant future. Marking the peices is a very good idea though if possible! Dan
__________________
Nortech is ACE! |
#19
|
||||
|
||||
Quote:
price for parts with ID holes would need to retail @ £9.25 trackside or £10.00 posted (this is all due to extra machine time) It's possile to have another batch made up today @ a push with or without holes if I phone in the order before 12:00. Next slot I have for machining will be middle of next week. how would you like them? |
#20
|
||||
|
||||
Hi Glenn,
Id like them with the markings please, and I'll have two sets. Let us know if/when and we'll sort out payment. I'll ask for mine posted, doubt I can make it to TRCC now til the next winter season. Chriss |
|
|