Show me your Durango's

[FloFlo]

Hi .

[streetfreak]

Xerun 60a esc with 6.5 geared 22/87.great 4wd buggy running 4600 promatch nimh with optional battery holder.stiffer springs in rear (black)
work really well with heavier nimh,lovin' the durango!!

[carman]

here is a pic of my dnx408.
it has all the v.2 upgrades and is running the go gx2 engine with a jp-4 pipe.

[av4625]

Hi ther have you run the car yet? i see your running the vented shock caps have you ever had your bladders split arount the circular bit at the top that seals it? i cant run the vented caps cause the bladders keep splitting and i build them like lutz does on youtube

[carman]

yes i have had problems with the vented caps and the bladders splitting too. i fitted the caps and did 1 race meeting and they were fine and felt lolads better then when i ran a practice day 2 bladders went.
i was using the new stronger bladders too. i have put the older style bladders back in but haven't run it with them in yet.
do durango not do testing?

[av4625]

how do u no if the bladders are the stronger ones as it doesnt say on the pack

[carman]

You know by the feel, they are alot thicker.
I'll post a thread on max and see is Chris doughty replies.

[av4625]

let me no if he does

[eyeayen]

I think a lot of people were using the Losi bladders.

[av4625]

i tried them but i dont like how shallow they are i like the deep bladders from durango but i dont like how they split

[andys]

My V3 Shell 'mounted' and the car ready for the oOple as i'm on holiday from tomorrow until the weekend of the oOple

Orion R10 speedo
Orion 7.5 vortex motor
Savox servo
HPI cells

If you are racing at the oOple - come and have a chat if you want a body painting

[GRIFF55]

Looking good!! Are those serrated wheel nuts or nyloc?

[andys]

Originally Posted by GRIFF55

Looking good!! Are those serrated wheel nuts or nyloc?

Wheel nuts are from RC Lazy - I think they are HPI ones.
They are serrated and nyloc not had a wheel come off since upgrading to these. They are I recall only sold in a pack of around a dozen, and they are quite expensive - but worth it to finish every race !!!

Link http://rclazy.com/blog/2011/08/17/hp...el-nut-103729/

[GRIFF55]

Just checking they were serrated mate, didn't want em coming off at oople for you

[Kurtje]

Just finished my DEX410V3.
Only need to change the yellow conical washer and the 2.8mm washer at the rear hub to red ones like red

Hope te fit the electronics this week!

[DeMogoobra]

Still missing the electronics but I think people will be able to spot it coming up from behind

[big_whyman]

After some soul searching, I have made my pact with the Devil and gone cab forward Worryingly i kinda like it, now for the 410

[Kurtje]

Tested my 210 yesterday at the track...
First time with gear diff and i loved it



Today I painted my DEX410 V3, next week fitting electronics

[(off)roadrunner]

My 3.

[Dazza B]

Dex 410 v3 with a few modifications.. Losi 22 shocks, custom from shock mount, few bits of tresrey bling and an awesome new shell courtesy of George Fairweather aka no 46