|
#1
|
|||
|
|||
xray t3 2012 set up
hi to all my xray t3 2012 is all set up shocks are equal length all adjusted for 5mm ride height droop all the same but when i check tweak by lifting rear of car under chassis to see if both tyres leave the ground at the same time they do not , side that lifts first i tighten front opposite shock and loosen other front shock i do this for the front aswell by lifting under front of chassis and adjusting rear shocks i do then get all front and rear tyres leaving the ground at the same time is this normal thing you have to do ? i have checked for chassis tweak by putting blocks under chassis they is no movement of chassis thanks for any replys
|
#2
|
||||
|
||||
thats the correct way but the spring tensions should not be massisvly different side to side, if it is your tweeked, slacken all top deck screws and puut chassis on a flat surface.
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#3
|
|||
|
|||
Quote:
|
#4
|
|||
|
|||
car is balanced side to side never had no probs with t3 2010 thought the 2012 would be better but seems harder to get set up
|
|
|