|
#1
|
|||
|
|||
Mad Rat bodyshell styles
I am planning to upgrade my mad rat with a brushless systam namely the Ezrun 3 in 1 combo that you can buy from Hong Kong.
I noticed that the ESC is quite tall and that the chassis tray is shallow so the body is most likely going to get in the way. I would like to replace the shell so it fits over the esc and the fact I want to personalise it myself with my own paint job. Any suggestions to what shell will fit/ suit this modification and where I can buy it? James |
#2
|
|||
|
|||
Had an ezrun in my rat, lay it on its side still tight but fits in, ran it at torch a while ago now used 23t pinion with stock spur and went well
|
#3
|
|||
|
|||
Cheers.
Looking to buy 10.5t brushless 60amp esc. Ive read that 9t is a good upgrade for the rat but isnt a 9t a 380 size motor comparing to X.5 whhich are all true 540 motors? |
#4
|
||||
|
||||
Quote:
personally if i was looking buying a cheap 10.5 combo for knocking about with or a cheap buy perfectly capable upgrade to the ezrun system, i'd go either for the 5.5t & 60a esc ezrun combo (unsensored) or look for the xerun systems from Hong Kong instead, which are essentially sensored ezrun systems & pretty much the exact same thing as the Speed Passion range without the inflated UK price tag & fancy livery. |
#5
|
||||
|
||||
I used to use a Proline Vortex rb-5 shell when i used an ezrun.It was not a bad fit.
Ive heard the Kyosho sword rb-5 shell may fit well also. http://i158.photobucket.com/albums/t...g?t=1294873651
__________________
Hobao H2 Pro xbox/ps3/Wii U : budge1972 (add me) |
#6
|
||||
|
||||
budgio what shocks are on your 2wd?
__________________
Rob Martin _____________________ Sponsers Viper~~B-FAST~PGXGraphics~Nankinhobby~Trick-Parts~Speedzone Batteries. |
#7
|
||||
|
||||
They were the Tamiya TRF aeration shocks but i now run the kit shocks.
__________________
Hobao H2 Pro xbox/ps3/Wii U : budge1972 (add me) |
#8
|
|||
|
|||
Hi all, anybody knows if I can use a jconcepts illuzion body in my x2 ?
Thank you |
#9
|
|||
|
|||
Nobody tried it ?
|
#10
|
||||
|
||||
Does anyone know if jconcepts Illuzion cab forward bodyshell for rb5 will fit on madrat?
|
#11
|
||||
|
||||
A mad rat Evo will fit even with it being 6mm longer, I have a couple in.stock at the moment
__________________
|
|
|