Caster on dex410r

[Kiixx]

Does anyone here know the caster degree on original plastics for the old DEX410R ?

[shaun m]

I think with the original dex410r it works out 17degree's , plus the kick up angle etc , but 17degree on the caster block.

[Kiixx]

Hmm,, well i found out that the chassis have 12 degree kickup in the front, and 13 in the rear, and when mesuring the original hub carrier, i get 5 degrees, and that makes sense somewhat as 12+5=17 degrees in total.

But i was thinking more like hub had 1-3 degrees, as everywhere you can read that drivers adding the 17-19 alu option hub carrier says that the car is much more calm to drive.

I doubt that Team Durango accually adds 17 degrees to the kickup, so i think that the 17 degree they print on the hub carrier is what you'll get in total by using that specific hub carrier. please correct me if i'm wrong.

[rcjunky]

the plastic and unmarked aluminum are 17*, the 19 and 21's are marked. That is the total castor angle. anything less then the 17's would be insane to try driving

[av4625]

The car should be less twitchy with the 19's or even less with the 21's but will add on power steering!