|
#1121
|
||||
|
||||
The plug type is standard across all speedos and motors so you can use any.
We have the Tekin ones in stock in both 100mm and 200mm length http://www.the-pred.co.uk/zencart/in...roducts_id=281 and http://www.the-pred.co.uk/zencart/in...roducts_id=282 Kev Quote:
|
#1122
|
||||
|
||||
|
#1123
|
||||
|
||||
Looks like the kinda thing that happens when the cap is faulty, just desolder it and try.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#1124
|
||||
|
||||
Hi Randy,
I'm returning to the UK from the USA next week and want to run 13.5 open/mod. What settings would you advise for 12th with RS Pro. Thanks |
#1125
|
||||
|
||||
Quote:
I did a bit of reading and saw a few threads about maybe the servo which I have at the max EPAs (going to swap it out today and test) that it could be drawing more power than necessary as Im maxing out the servo points No caps in the post today either!! |
#1126
|
||||
|
||||
HI GUYS,
AT THE MINUTE I RUN A TEKIN RS PRO IN MY XRAY T3 WITH AN LRP X12 13.5 MOTOR. I WAS WONDERING WETHER THERE WOULD BE ANY EXTRA SPEED ADVANTAGE IF I WAS TO RUN A TEKIN REDLINE 13.5 MOTOR ALONG WITH MY RS PRO. HAS ANY ONE TRIED THESE COMBOS OR? ANY ADVICE WOULD BE HELPFUL THANKS NATHAN |
#1127
|
||||
|
||||
Never run the RS or RS Pro without a cap, ever.
The caps do get hot. If the cap is hot that means there's a lo of ripple current in your setup. Weaker packs or simply a hard running setup. A 2nd cap of the same time will bring temps down. That sounds is very odd. The first thing I'd try is another motor right out of the gate. Make sure you have the A to A , B to B, and C to C set correctly.
__________________
Tekin Team Manager |
#1128
|
||||
|
||||
that was after changing motors, I swapped out the servo and now have the EPAs not at max and drove it up and down the street a few times and didn't get the noise/hacking.
That could have solved the problem, hopefully if the weather is ok Ill get out and test it at a track tomorrow Caps truned up today (friday) thanks Kev |
#1129
|
||||
|
||||
Hmmm, two weeks and still no reply.
LRP here I come!!! |
#1130
|
||||
|
||||
check tekins website they have setups there
|
#1131
|
||||
|
||||
Setup for what?
__________________
Tekin Team Manager |
#1132
|
||||
|
||||
setups for escs in different cars
|
#1133
|
||||
|
||||
__________________
Tekin Team Manager |
#1134
|
||||
|
||||
How do I get more instant, hard braking instead of the soft braking I have now?
Or somethine like the more I puch the trigger the more brakes I have? yes Im asking the same Q for 2 esc as I have both esc and it was set up with hard braking till I had to update the software and it wiped it B4 I could see how it was set up |
#1136
|
||||
|
||||
There are a few things to check. All led's flashing while hitting full brakes is the first. 2nd is make sure your brake strength is turned up. Also if your transmitter has ABS turn it off.
__________________
Tekin Team Manager |
#1137
|
||||
|
||||
hi i am having a Little problem with my tekin rs pro i have two light flashing as soon as i turn the esc on the esc still works grate but would like to know why thay are flashing and the lights that are flashing are 3 and 5
thanx codi
__________________
C4.1 RSpro redline 7.5 B44.2 RSpro redline 6.5 durango dex410 HW 120a redline 5.5 durango desc410R RX8 PRO4 4000 |
#1138
|
||||
|
||||
Led's 3 and 5 flashing simply means you're in timing profile 1 or "spec" mode. This spec mode is also called "blinky" for the blinking led's. Switch to any other timing profile and it will stop.
__________________
Tekin Team Manager |
#1139
|
||||
|
||||
ow thank you will i need the hot wire to change it or can i do it from the esc
__________________
C4.1 RSpro redline 7.5 B44.2 RSpro redline 6.5 durango dex410 HW 120a redline 5.5 durango desc410R RX8 PRO4 4000 |
#1140
|
||||
|
||||
Use the mode button to go to TP, then the incr button. Depends what setting you want?
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
|
|