|
#21
|
|||
|
|||
Quote:
As per the video - due to the way it falls, it looks like one arm / area of the Hex looses power as it goes right over. I thought the Naza V2 was supposed to 'try' and stay up if just one motor goes down.... Anyway - i'll see what they say - do you have a spare Naza V2 lying around we could try ?! Drop me a text and let me know when your free in case I need your help Doing my head in this is - I seem to be wasting far too much time chasing this problem down |
#22
|
|||
|
|||
Another quick test - I connected the 9XR and Frsky to the KK2 to rule out the radio.
It all works just fine - I set up a new model for the KK2 and it fly's great thrashing it around in the garden. So - it must either be: Naza faulty or I have set something on the Naza wrong? But it flies ok before it crashes.... In the 9XR I have channels set up as: 1 = THR 2 = AIL 3 = ELE 4 = RUD I guess that it does not matter which channel is assigned to which control as long as they are plugged into the Naza in the right places - and they were otherwise it would not fly! I'm 99% certain my Naza is the problem now. Had no reply today from quadcopters |
#23
|
||||
|
||||
Andy, if you are at Batley Sunday, you can take my NAZA to try. I'll bring my laptop to go through the settings with you.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#24
|
|||
|
|||
Quote:
I'm going to Batley - so ill bring it with me |
#25
|
|||
|
|||
550 is 'almost' finished - going to try the tarot gimbal on it before trying the Zenmuse.
I bought a super cheap lcd screen from banggood and the cheapest Boscam 5.8 setup from hobbyking - I went for the upgraded antenna though. So now I can charge the GoPro whilst it's on the 500 as well as monitor what is sees through the GoPro. I have a video switch too so when I get a small FPV cam I can switch between the 2 in flight Here it is - minus props. As it's super windy - I can't fly it |
#26
|
||||
|
||||
Nice, what's round your gps antenna? I broke my gps antenna case last crash.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#27
|
|||
|
|||
Heyup Neal. Merry Christmas
The GPS Thing was from ebay - it's just a 3D printed protector. Not sure how much good it will be in a proper crash - but something is better than nothing. |
#28
|
||||
|
||||
top banana!!
All we need to do now is have a meet...... |
#29
|
||||
|
||||
Quote:
My case broke in the impact, which resulted in the carbon rod snapping, never to be seen again. Instead of the 3m tape/glue to ali mount breaking, it broke the plastic case instead.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#30
|
|||
|
|||
un predictable flip
I had same problem with a tri that I was testing. All components were known good, except for an untested control board, and trying to use flashed ESCs on 4s. In the end, after the last crash,, it was determined that there was a bad sensor on the board. No amount of tuning and fiddling would fix it. When all else fails,, replace the control board with a known good one!
|
|
|