New 28 Tooth Nylon Idler Gear For 2WD Cars

[Disco-Panda]

Due to the use of high powered Motors in 2WD cars this 28T nylon idler
gear improves the durability of your gear box.

Made from Nylon.

Fits: X2, X2c, X2sc, Xpro, XTpro

Item: AR28T - RRP £5.99



AVAILBLE NOW (UK)

[ConceptRacing]

Thanks for letting us know, but that informations has been released more than a couple of weeks ago and quite a few are already running them in cars, so far no issues, mines still in one piece, lets hope it stays that way, of more interest would be the new slipper pad discs that maybe out soon.

[Disco-Panda]

Originally Posted by ConceptRacing

Thanks for letting us know, but that informations has been released more than a couple of weeks ago and quite a few are already running them in cars, so far no issues, mines still in one piece, lets hope it stays that way, of more interest would be the new slipper pad discs that maybe out soon.

Hi Eric, this is a different gear tested and manufactured in the UK.

[ConceptRacing]

Cool, even better, any available to test or purchase?

[Disco-Panda]

Originally Posted by ConceptRacing

Cool, even better, any available to test or purchase?

Hi Eric these have already been tried and tested by the UK racing team as posted before they are available at Ansmann racing UK part number is AR28T

[ConceptRacing]

Sorry, just had the sales rep here and he knew nothing about them, I must have missed the earlier post about them or misunderstood it.

[JezT]

Where are these available? for the public?

[4_cell_racer]

Originally Posted by JezT

Where are these available? for the public?

Ditto ^^^^^

[ConceptRacing]

just asked the rep about these and he knows nothing about them, he is finding out for me, hopefully they will be available soon.

[lordnikon]

Is it right that you need 2 of these to fit into the gearbox ??

[Disco-Panda]

Originally Posted by Disco-Panda

AVAILBLE NOW (UK)

As i said in my first post they are available now!!

[racingdwarf]

Right, ansmann have changed there tune a couple of times with these.

I found these on ansmanns site about three weeks ago,( posted thred in this section at the time) so asked my LHS to put some on order and gave them the part No. when shop 1st spoke to ansmann they were told the part was being made by RW and would be avalable within the next few days, week later nothing, so shop spoke to RW who would neather conferm nor deny they were making them Hmmmm, so asked the shop owner to be frank with ansmann and find out when we were going to see any of the nylon idlers, or for that matter restock the alloy ones, he was then told 2 poss 4 weeks!!

so I order myself a load of team C ones to keep me on track.

I do hate changing storys from importers etc, if you have not got it, just tell us

[4_cell_racer]

Originally Posted by lordnikon

Is it right that you need 2 of these to fit into the gearbox ??

Only for the Mad Monkey, yes for Mad Rat you only need one

[Royal Male]

worth getting one for my Core then?

Someone mentioned new slipper plates? Is that because everyone has the same problem of a very loose slipper....mine is as tight as it can go with a washer added on and it still slips...

[MK Racing]

I think the ansmann ones have been made by rw racing, I have also had some made by rw & they will hopefully arrive tomorrow.

Marc

[4_cell_racer]

Originally Posted by Royal Male

worth getting one for my Core then?

Someone mentioned new slipper plates? Is that because everyone has the same problem of a very loose slipper....mine is as tight as it can go with a washer added on and it still slips...

Didn't your CORE come with the alloy idle gear?? As that's what was in my CORE

Think it's something to do with the pads?? As they slip too much which then generates heat through the top layshaft, which then softens the idle (STD) gear and it strips

[Royal Male]

cant remember the material of my idler....probably is ally

any fix for the slipping slipper? I've heard mixed feelings of roughing the surface with fine wet and dry.......

[ConceptRacing]

Managed to change my order for the white pom versions and have the new ones coming instead, should have 6 in stock by thursday, I will get one fitted for the Oople event and see if it lasts the weekend,
Sorry if we dont always believe delivery dates as we have been let down more than a few times and it kind of gets you down when you can get them from abroad weeks if not months before they are available here, I know there loads of factors that will slow down new parts into this country but surely there must be a process in place to get them here a bit quicker.

[MK Racing]

Just received my RW delivery, I now have stock of the 28T gears, they come in a pack of 2 for £10.50

http://www.m-k-racing.com/product_in...oducts_id=9063

[Battle_axe]

the ansmann ones are avalible like in the first post ask you LHS and give them part no AR28T this is the first of the ansmann uk speciffic upgrades

i have ran them for 4 weeks racing 2 times a week so far no problems