|
#1
|
||||
|
||||
Any news regarding the SX??
Hi there...
The Schumacher section seems to be dead for a while... Matt and Mossy can you please give some news regarding the SX developpment...are you still running some mods (not shot by Jimmy yet) or everything s fixed now? Some info regarding the production schedule...(if you have any) Thanks a lot Jean-Christophe |
#2
|
||||
|
||||
My car is as shot by Jimmy at our last national - because that was my car! (the NiMh one not LiPo).
Unfortunately, i don't have any confirmed timing, so i'm afraid i can't be of any help to you there.
__________________
Matthew White |
#3
|
||||
|
||||
so do i take it that theres no news then Matt, no info at all, no changes,etc anything not even a sniff,awww come on there must be something,
__________________
Mattys the driver,my names carl
|
#4
|
|||
|
|||
Any news on a 2wd ?
|
#5
|
||||
|
||||
really hungry to know when will the Cat SX be available in the market.......
__________________
mini@Vintage Team Yokomo/ Associated |
#6
|
||||
|
||||
yes an idea of how much longer would be great !
I don't want to rebuild my 3000 unless I really have to !
__________________
1995 Scottish On-Road champion 2004/05 WesternCanadian Touring Modified and Touring 19 turn Champ 2004, 2005, 2006 and 2007 World of Wheels Champ |
#7
|
||||
|
||||
I heard september, im not sure how accurate that is but i know that the B team drivers still dont know when they are getting their cars
|
#8
|
||||
|
||||
I heard end of May, then end of June, then end of July.....
I've cancelled my order now, as the reionals will be over before it comes out
__________________
KECKSpeed - Seat of your Pants R/C Racing www.keckspeed.co.uk ryan@keckspeed.co.uk |
#9
|
||||
|
||||
Ryan did you order the Lipo or the Nimh version ?
__________________
Stevie Brew BW-RACING@HOTMAIL.COM http://www.oople.com/forums/showthre...hlight=stegger |
#10
|
||||
|
||||
Lipo
__________________
KECKSpeed - Seat of your Pants R/C Racing www.keckspeed.co.uk ryan@keckspeed.co.uk |
#11
|
||||
|
||||
|
#12
|
|||
|
|||
is it just me or are the spares a tad pricey on there? the shock towers especially, i thought they would be cheaper as they seem use far less carbon than on other cars.
__________________
4wd - X4TE 2wd - X2C (Mad Rat passed down to son!) Ansmann Racing UK RIP - MicroTech Racing Trader Feedback |
#13
|
||||
|
||||
Was thinking that myself. Got my name down for a CAT SX.
Hope they're strong.........
__________________
|
#14
|
|||
|
|||
They're 4mm thick and should be able to cope with some abuse.
|
#15
|
||||
|
||||
I still don't see a release date, although on the Schumacher forum they say July, so should be really soon !
__________________
1995 Scottish On-Road champion 2004/05 WesternCanadian Touring Modified and Touring 19 turn Champ 2004, 2005, 2006 and 2007 World of Wheels Champ |
#16
|
||||
|
||||
Has anyone seen the Lipo version? Its such a different layout it'll be interesting to see how it goes. The nimh looks very good on track!
Also, anyone know if saddle pack lipo&s will fit in the lipo version? |
#17
|
||||
|
||||
I hope so - I've got saddle pack Trakpower 4800's to squeeze in when I get my SX. They're not that much longer than the stick surely? I managed to fit them in a Durga with no problem.
__________________
|
#18
|
|||
|
|||
Quote:
I would be glad if you could post some pics on how you fit and secure this pack in you Durga, including connections. On my side I have a bit of difficulties with the connectors that do not allow putting the body properly in place (problem with the height of the pack). Thanks |
#19
|
||||
|
||||
Sent you a PM - Can you not solder the 4mm plug at 90 degrees to the wire, so the wire lays flat on the pack? Or use 2 battery bars with a 4mm plug at one end to go into the pack, and the ESC wire soldered at the other end - just to take the wire away from going directly into the pack at an angle that is preventing you from mounting the shell.
__________________
|
#20
|
|||
|
|||
Thanks for your feedback and PM. Started the soldering work with wires at 90 degree with corally connectors. Finished 2 small extensions that allow me to use the carbon plate and aluminium screws coming from a TA05.
It should work! |
|
|