shark pinions

[Paulnuneaton]

looking for some pinions for my lrp shark fitted a lrp brushless motor with a 2mm main shaft any help were to get these from will be gladly welcome need to find what range i need as well need for next week end so anyone put me on to a site that sels them please

[jim76]

microtech have a full range of micro pinions. what motor is it and how big/twisty is your regular track? generally for micros running indoors on twisty tracks you will want about 11-12t pinion, maybe 10t if its very tight track and fast motor

[tommy]

Originally Posted by Paulnuneaton

looking for some pinions for my lrp shark fitted a lrp brushless motor with a 2mm main shaft any help were to get these from will be gladly welcome need to find what range i need as well need for next week end so anyone put me on to a site that sels them please

hi mate

ive got a lrp mptor in my shark im sure its a 2.3mm shaft and i use a 12 or 13 tooth for racing i got them from microtec

[Paulnuneaton]

checked the motor is a lrp novack 5700kv 2mm shaft im right aint i

[tommy]

not sure i thoght LRP had only made one micro sized brushless motor called the vector thats what i have ands its got a 2.3mm shaft

[Ian F]

Is it this motor?

http://www.s-m-d.co.uk/50250-vector-...370-i2313.html

Give Steve a ring at http://www.manseltonmodels.com/ don't think there listed on the site but he has pinions for the lrp and novak micro motors

[Paulnuneaton]

the motor is a 1/18 orion vortex 7500kv was in a carisma pro now you guys have me flunksted as to the shaft dia

[markwilliamson2001]

The orion is a 2.0mm shaft.

HTH

[Paulnuneaton]

tHANKS MARK