|
#1
|
|||
|
|||
Lazer ZX-5 upgrade help
Hi all,
I've got the RTR version of the ZX-5, so far this is what I've done. 4.5t brushless motor & ETC (it's not running anywhere near it's max because I can't handle it) 2.4Ghz radio gear New wheels, tyres and foam inserts I'm put some traxxax shocks on because the originals leaked I've had to replace the plastic bars on the front of the car with alloy ones as the originals broke (suspension holders?) A new shell? It's not the bullet style one and I can't even remember where I got it from Anyway, obviously I know that many of the parts on the car probably won't last very long, so what I would like to do is plan to upgrade the car gradually, but I know some parts are very much dependent on other parts before they can be fitted. Next on my list is to replace the plastic CV's? with metal ones (front and rear), and I'm just wondering what parts I need to completely fit these? Do I need new wishbones and driveshafts? Hubs? Wheels? Is this what I should be doing next, or is there another upgrade you would say would be more important? I'd just like to know what to buy to complete the job, especially when some parts take 2 weeks to be delivered, I don't want to get the parts delivered and wait 2 weeks for me to realise I need another part. Does anyway have a kind of upgrade path? i.e. what you'd replace first (and part numbers), so I could upgrade in stages? and before anyone mentions, yes long term I might have been better off buying the FS kit rather than the RTR, but at least this way I get to work on the car bit by bit. |
#2
|
|||
|
|||
Definately change the driveshafts.
As long as you get the complete CVD set you won't need anything else to change them, it should be a direct fit in replacement of the dogbone and zheel axle. 4.5T is a little bit mental in a buggy, I'd suggest trying something slower like a 6.5. |
#3
|
|||
|
|||
Quote:
Although the motor is 4.5t I've got it restricted via the radio gear I'm using to a speed which I'm comfortable with. |
#4
|
||||
|
||||
A 4.5 is silly fast and near completely useless in a 4wd buggy, especially a Lazer RTR. Even if you're limiting it via the transmitter it won't be helping your driving any. You'd probaby be a lot more comfortable driving something like a 7.5.
Your best bet would be to keep your eyes out for a decent second-hand Lazer and break it up for parts. Would probably be a fair bit cheaper than upgrading your RTR Lazer. |
#5
|
|||
|
|||
So would you recommend buying something like this?
http://www.oople.com/forums/showthre...ghlight=kyosho I was thinking of buying all of the bits to convert to an SP, but it would be just as expensive as buying another car. Although I like the idea of everything being new. |
#6
|
||||
|
||||
That is a good buy.
__________________
|
#7
|
|||
|
|||
I had to have a quick check there just to make sure you were not the seller
I'm trying to source a price for every part needed to convert to the SP, then I'll weigh up the best option. My problem is I bought the RTR on a budget, have spent loads on it replacing the electrics etc. If I buy another car I have to hide it from the wife....she'd go nuts, where as if I buy all the parts, it's much easier to get away with. Women eh! |
#8
|
|||
|
|||
buy a new kit and ask the shop to get rid of the box and post all parts int their bags
|
#9
|
|||
|
|||
can't really afford a whole new kit to be honest, especially not at £290
|
#10
|
|||
|
|||
I found an unbuilt SP on ebay US for £140 + delivery, but the guy doesn't want to post it abroad...what a bummer, would have been perfect.
|
#11
|
||||
|
||||
But expensive
__________________
|
#12
|
|||
|
|||
£140 expensive for a brand new unbuilt sp?
Looking elsewhere I'm looking at £300 for the kit. |
#13
|
|||
|
|||
ok, I've had a look around and put together a list of things I need to do to the RTR to more or less make is an SP, apart from the chassis which I'll change later to a carbon fibre one. I've not planned to replace the shocks, as I've already replaced them.
W5201 x1 - Front wheels LA254 x 1 - Steering knuckles LA255 x 1 - Front & rear A-arms (full set) LA252 x 1 - Rear hub LA257 x 1 - Front universals (these seem expensive at £30) LA258 x 1 - Rear universals (again, £30) LA256 x 1 - King pin UM129 x 1 - 4.8mm ball shaft W5194-01 x 2 - Plastic shock parts 1368 x 1 - Hex screws 1378 x 1 - Hex screws The above seems to be what I need to sort out the suspension area, apart from the shocks. I'd also like to replace the plastic shafts on the car to the metal ones, I'm not 100% certain what parts I need for this, but from comparing the diagrams I think I need the following; LA201 x 2 - Steel differential shaft set WBD04 x 2 - Pressure plate set LA223 x 2 - One way shaft 96647 x 2 - Shim set BRG014TS x 2 - Teflon bearing Can anyone confirm if I'm missing anything. Also, where's the best place to buy all of this? |
#14
|
||||
|
||||
Quote:
__________________
|
#15
|
||||
|
||||
edit.
__________________
|
#16
|
||||
|
||||
I converted mine from an original zx5. Your parts list sems right to me. Cost was about £100 without the shocks if I remember right.
In hindsight I would have bought a secondhand one.
__________________
|
#17
|
|||
|
|||
Quote:
The one I found on ebay US would have been ideal, brand spanking new, but like I say, the guy won't send it abroad. |
#18
|
||||
|
||||
Wouldn't worry too much about that. Mine is an original converted and some of it is 5 years old now without any problems.
__________________
|
#19
|
||||
|
||||
My advice would be to save up, enjoy the car you have and when you get the cash together get an FS.
Just keep in mind the FS will need saddle pack cells if your buying any (you can always tape them together to form a stick for use in your current car). The FS is practically a new car, it shares very little with the original ZX5 and performs more consistently than either that or the SP. As Neil has stated on another thread the ZX5-FS is a true 1 box purchase, even the springs are usable (although not optimum) for the UK. Now they have the price down to sub £300 again I think that is something to consider! |
#20
|
|||
|
|||
Quote:
|
|
|