|
#1
|
|||
|
|||
Trouble programming Speed Passion ESC
Evening all,
I'm returning to the sport after a 20 year hiatus, I recently purchased a Team Associated B44.3 and I'm having trouble removing the brake drag from its Speed Passion ESC. Has anyone experienced this ? Any suggestions appreciated. Thanks Tim |
#2
|
||||
|
||||
do you have a programming box for it ?
I belive it is possible by "stick banging selection " during set up easiest method if a local racer to you will do it for you takes about 10 secs once hooked a suitable programmmer |
#3
|
|||
|
|||
Thanks for the reply!
I now have a programming box, so will take it too my local club meeting next week and search for assistance. Thanks for the help! |
#4
|
||||
|
||||
remove 3 wire lead that goes from ESC to rx plug into progarammer connect battery and switch on esc !!
programmer should light up depending on which one you have LED or LCD its straight forward im sure a local will sort you out if still stuck were a helpful bunch usually regards dave |
|
|