|
#1
|
||||
|
||||
Lipo for Spektrum DX2/Etronix Pulse
Hi
Is there a lipo that can be used in transmitters, particularly Spektrum DX2 and Etronix Pulse, to replace the usual 8xAA batteries?
__________________
Associated B44.2, Nosram Pearl Evolution ESC, Fusion Exceed 6.5T , 4200 Lipos, Savox
|
#2
|
||||
|
||||
Have a look on hobbykings website.
I got a Turnigy 2200 for my dx3 for less than $15 posted. Just measure your original battery pack and get one that fits. I had to solder a connector onto my dx3 to fit the lipo but that was easy enough to do!
__________________
if it aint broke-drive harder |
#3
|
||||
|
||||
This is becoming a very common mod. Particularly in high power transmitters for long range and FPV flying. Just make sure you have a way of monitoring the voltage so you don't kill the pack. And never be tempted to charge the LiPo with the plug in the wall charger that comes with many transmitters.
|
#4
|
||||
|
||||
Quote:
I monitor mine with the LCD display on the DX3 but have also fitted one of those cheap lipo low voltage buzzer thingys from ebay to the balance port of the lipo but upto now I haven't needed it with the display!
__________________
if it aint broke-drive harder |
#5
|
|||
|
|||
Quote:
Last edited by K-Brewer; 07-02-2014 at 03:41 PM. Reason: spelling |
#6
|
||||
|
||||
Quote:
One of the best mods/upgrades I've done in ages-can't remember the last time I had to charge it up!!
__________________
if it aint broke-drive harder |
#7
|
|||
|
|||
I've got a Core RC transmitter (Identical to the Etronix I beleive) and I use this lipo: http://www.hobbyking.com/hobbyking/s...dProduct=31945
Perfect fit and even has the correct connectors pre-fitted. |
|
|