Quote:
Originally Posted by Gavin Collingwood
They're kyosho wheels, as far as I know they only fit the rb5/6 possibly tamiya aswell. They are 12mm hex but have a different sized hole and offset to the 22 wheels which are also 12 mm Hex so be careful just coz it's 12 mm hex doesn't necessarily mean they'll fit.
There are two types of cut stagger, the low profile ones like in the pic (which are most common and you have to cut off the excess wheel from the inside to make the wheels narrower. And there's a higher profile cut stagger (less common in yellow compound more common in green compound for wet) which stretches over the full width of the 2.2 front wheel so there's no need to make them narrower.
|
Gavin,
I thought the cut staggers were only available in the higher profile and as far as I'm aware you can still get the higher profile in yellow compound unless Schumacher have stopped supplying them?
Lee
28-12-2012
Threaded Mode