|
#1
|
|||
|
|||
Length of the original RC10 fr/rr shocks?
Hi all,
I'm looking for a set of shocks for a RC10 first generation. The nice gold finishing ones, ideally with the white parts I found some in the web but I don't know exactly the length (eyelet to eyelet) of the original front and rear shock... in inch and cm. thanks for your help! Val |
#2
|
||||
|
||||
i just measured the ones on my team car. (factory long arm alloy pan version) and here's the measurements i got. note these may not be exact but they are close.
front 69.5 mm 2.735 inches rear 90.8 mm 3.576 inches i measured from center mounting point to center mounting point. hope this helps. |
#3
|
|||
|
|||
team car isn't the same as the first generation rc10's. different shock tower, arms, AND SHOCKS.
val, if you have a shot of your rig, shoot it over so i can see what type of shocks you have up front. you might have the .56" shocks. |
#4
|
|||
|
|||
the shocks
Thanks for your help lowclass and 4wdlover, I think I found the ones I was looking for.
|
|
|