Adjusting the 22-4 Slipper and diffs

[simonrhart]

The 22-4 is a bit confusing to set the diffs and slipper correctly. I want my rear as loose as possible and the front slightly tighter. On the Kyosho Lazer this is easy as you see the slipper turning when the diffs are not.

On the 22-4, you have to listen for the slipper slipping as it does not turn when the rear is slipping (unless you open it up to visually see it). For the front however, the slipper does turn when it slips.

I am not running the clicker. Just very confusing as the Lazer you can easily see the slipper slipping!

Setting the gear mesh also a challenge but, it's nice and enclosed.

Any tips from 22-4 owners to make this easier?

Simon