Lazer zxr

[Welshy40]

Ok,ive managed to buy not only a pretty mint Lazer ZX but also a pack of Sanwa 1400sc, 1700sce,1700scr and an esc which Ive only heard about but never seen one in person and a motor which is one of the hardest to get shark attack. The motor means more to me as I got so many drives from this but was a great motor, shame they didnt really make the name last as they had great potential, I beat a few worlds qualifiers with this brand.

Ive now got a ZX, a ZXR, a ZXRR, ZXRS and when finished to my standards a ZXTC which is in the distant future.

[HKS_TRD]

Originally Posted by Welshy40

Ok,ive managed to buy not only a pretty mint Lazer ZX but also a pack of Sanwa 1400sc, 1700sce,1700scr and an esc which Ive only heard about but never seen one in person and a motor which is one of the hardest to get shark attack. The motor means more to me as I got so many drives from this but was a great motor, shame they didnt really make the name last as they had great potential, I beat a few worlds qualifiers with this brand.

Ive now got a ZX, a ZXR, a ZXRR, ZXRS and when finished to my standards a ZXTC which is in the distant future.

In for pics :-)

[isobarik]

Originally Posted by HKS_TRD

In for pics :-)

Yeah with out piga its just brag 😆

[Welshy40]

When it arrives i will. I will also show my work in progress cars as well.

[isobarik]

Just wanted to inform those who are in need for unicranck 39655
Can use the la-361 instead same mild just black instead .

Mvh isobarik

[Welshy40]

Iso, have you tried it as it does look slightly different.

[isobarik]

Originally Posted by Welshy40

Iso, have you tried it as it does look slightly different.

What is different then with it ??? Zoom in on it and you will se the 39655 number

Mvh iso

[Welshy40]

Originally Posted by isobarik

What is different then with it ??? Zoom in on it and you will se the 39655 number

Mvh iso

I noticed the servo arm section is designed diffrrently, looks like the inner hole rather than both inner & outer. Still Im getting one never the less, looks good and nice find.

[HKS_TRD]

Does the buggy that is for have the same diameter steering shaft?

[Welshy40]

Looks like it does

[Welshy40]

Originally Posted by HKS_TRD

In for pics :-)

First up my tc, ok halfway thru but looking good at the moment. Chassis is a three piece (the one i managed to snqp when doing over 45mph when i hit the ceiling steel bars.

[Welshy40]

Second up will be my vintage runner for vintage events. Hyper clutch slipper, mms front gearbox casing, alloy rear top deck mount, finned motor plate, alloy pivot blocks. Ok top deck will be made with steering pole holes as this chassis flexes too much. Lipo trays im having a think on. Fitting the front diff and belt now.

[Welshy40]

Oops forgot piccy

[TurboLag]

Originally Posted by Welshy40

First up my tc, ok halfway thru but looking good at the moment. Chassis is a three piece (the one i managed to snqp when doing over 45mph when i hit the ceiling steel bars.

You were doing 45mph + on the ceiling... That is impressive

[Welshy40]

Originally Posted by TurboLag

You were doing 45mph + on the ceiling... That is impressive

Interferance when hitting a wall ramp but yes was impressive

[Welshy40]

Ok guys, Im having a pair of knuckle arms made out of Onyx with carbon fibre dust and kevlar as well so anyonegot any thoughts on this as I am sceptical as I know from past experience with the CF wishbones for the lazer were actually weaker than the kevlar reinforced so using both does have me a bit puzzled.

[fidspeed]

Hi vintage lazer fans
thought id add these picked up the pair recently
no im not responsible for savaging tub chassis I wondered if its repairable or worth it
im sure james will be able to assist
regards dave and mitch

[Welshy40]

Dave,

Nice, i see the floating servo top deck has been used. Chassis was cut by someone who didnt realise there was another option open to them for making the chassis flex without damaging the chassis, its useable at competition level but would make sure its filed correctly and super glued to stop bits coming off. I think also the original owner used stick packs as well so quite useful sghould you feel the need for that option.

Good cars, need a good clean and a bit of tlc but good buys.

[isobarik]

Originally Posted by fidspeed

Hi vintage lazer fans
thought id add these picked up the pair recently
no im not responsible for savaging tub chassis I wondered if its repairable or worth it
im sure james will be able to assist
regards dave and mitch

Looking good Nice find

Mvh isobarik

[RalfM]

Hi,
after some years with other activitys, I have reactivated
my Lazer. Now I want to buy some tuning-parts. I am looking
for rear hubs, made of alloy. Would this one fit to the Lazer ZX-R?
KYOSHO SPW 123

Thank you for answering.

Regards
Ralf