|
||
|
 |
|
||||||||||||||||||
|
#1
28-07-2013
|
||||
|
||||
LA-59
Lazer ZXR Mk2/ZXRR front C-hubs please. Did TEAMLINE do these later hubs or are they available in alloy I wonder?
Thanks- Jason
__________________
Vintage R/C nut.  Reliving all the good old days of r/c from the 80's and early 90's. -Jason ***always on the hunt for vintage KO ESC's*** 
|
|
#2
28-07-2013
|
||||
|
||||
|
|
|
#3
28-07-2013
|
||||
|
||||
|
__________________
Trader Feedback ==> http://www.oople.com/forums/showthread.php?t=154468 1/10 Kyosho Lazer ZX 1/10 Kyosho Optima Mid Custom
|
|
#4
28-07-2013
|
||||
|
||||
|
A&L also made some, very high quality. I will post a photo for you if your interested.
|
|
#5
28-07-2013
|
||||
|
||||
|
Thank you guys, I appreciate your responses with this. I'd very much like to see the A&L version too.
Please keep in mind that the LA-27 is for the original ZX and ZXR. They have a single hole for fitment of the C-hub hinge pin. The LA-59 has a second hole which not only widens the track but also increases the caster angle quite a bit. I have already seen the alloy C-hubs on eBay but they are a direct replacement of the original LA-27 not the LA-59. If anyone needs the AL-27 I have 3 nip sets. Obviously I require the later LA-59 items. I've seen these on eBay but was hoping to do a deal here should anyone have them. Thank you- Jason
__________________
Vintage R/C nut. Reliving all the good old days of r/c from the 80's and early 90's. -Jason ***always on the hunt for vintage KO ESC's***
|
|
#6
29-07-2013
|
||||
|
||||
|
LA-59 v's LA-27
Here's the difference with the C-hub's in question.
LA-27  LA-59 
__________________
Vintage R/C nut. Reliving all the good old days of r/c from the 80's and early 90's. -Jason ***always on the hunt for vintage KO ESC's***
|
 |
|
|
Linear Mode
