|
#1
|
||||
|
||||
Track star 80amp esc with 13.5 motor combo
Had a few of these track stars but the 120amp versions and had know bother but fitted this one for a friend and when trying to set it up once I have set the nutral zone then try to set full throttle it will not set the only way it will if I do reverse then throttle but as you can imagine you have full throttle in reverse any help would be great
|
#2
|
|||
|
|||
Reverse the throttle channel on the radio, then start again.
|
#3
|
|||
|
|||
Or change the rotation direction of the motor (if you can do so on the ESC)
|
#4
|
||||
|
||||
Tried both no joy esc will not let u motor just cogs
|
#5
|
|||
|
|||
If it's cogging I'd try factory reset, new sensor cable checking the power cables are right. Then new motor.
|
#6
|
||||
|
||||
Only gogs when u change 2 of the wires otherwise the motor is fine
Last edited by corsa148; 19-12-2016 at 03:12 PM. |
#7
|
|||
|
|||
If it works fine with wires connected correctly. Leave them like that. Buggering aroundwith the phase cables on a sensored set up is asking to break something.
Something else is wrong. |
|
|