|
#1
|
||||
|
||||
Schumacher mi3.5 questions
I got a roller with some defects that I am looking at maybe buying those bit I need but it seems quite expensive.
My front dogbones seem to be after market, the pins are about 2mm + wide, not the 1mm that fits with the blades. This is is eating up the out drives and they now need replacing. Is there a blade with a larger hole? Do the dogbones from the mission/mi1 fit? What parts fit this car? From what other cars? Mi2/Mi3/Mi4 etc Thanks |
#2
|
||||
|
||||
Enlarge the holes of the blade to 2mm
I know this can be done to xray blades |
#3
|
||||
|
||||
Do you have a part number to those xray ones, they might fit.
There are older blades in the pit box and they look like they are 2mm wide so I don't think it will work. I might need those new (original) dogbones.. then its not really worth buying all that stuff as it will cost about the same as a roller Edit I think I found some on ebay Ill have to measure the outdrives etc tomorrow |
|
|