Sanwa Gemini Ni-Cd transmitter battery

[MantaMan76]

Hello,

My transmitter battery wont hold any charge,when you switch on the transmitter the batt level is like a countdown,lol.

Has anyone got any S8N-700 stick packs or can you recommend an equivalant????


Thanks Stu

[Matt Airbrushing]

Im sure that I used a 8xAA battery holder in my old gemini, put some NIMH cells in there and it will last for ages.

[bodgit]

Try these for your tx. They act like lipo with very slow discharge if left for 1 year they will stil have 70% left in them. £9.99 delivered. bargin.
http://cgi.ebay.co.uk/8x-AA-2100mAh-...item35a9f0cac2

http://cgi.ebay.co.uk/TX-Pack-9-6v-N...item35a21667ba

[JCJC]

Another vote for Vapextech batteries, try this page
http://www.vapextech.co.uk/acatalog/...Batteries.html




watch out for the connector - Sanwa may have reversed cables on some transmitters - easy to change and you have an old battery to look at.

[MantaMan76]

Thanks for the advice guys.

[ianhaye]

i also use the same as above and defo worth a shot, also the conector is the right way round for the gemmi 2 tx

its the older sanwa gear that had the wires other way round

[MantaMan76]

Nice one,thanks Ian!!!