|
#1
|
|||
|
|||
Schumacher Procat
Hi there
I have been looking everywhere to find out who made a rear hex diff for a Procat with 24mm diff washers. I think it could be a Trinity part but it was a long time ago I built the car. I’m looking for parts to service the diff and get the Procat going again. Thanks for looking |
#2
|
||||
|
||||
these are schumacher ones but the diameter of the washer is only 21mm
https://www.wkeymedia.com/index.php?...ucts_id=509129
__________________
Schumacher cougar 2 Schumacher Procat Schumacher xls masami schumacher cat 2000 Kyosho Triumph Kyosho Lazer zx-r Schumacher Ld2 Associated B6.4 Associated B5 |
#3
|
||||
|
||||
Sounds like the MMS 14 ball version, the 12 ball version being comparable to the Schumacher in washer size. I believe the hex washers were less common than the circular ones.
|
#4
|
||||
|
||||
I think its possible to use LOSI hex rings
from LRM trans the ones that have the diff in the middle 100% sure that its possible to use them NOT 100% sure if they are 24 mm you have to ask an losi guy mvh iso |
|
|