|
#1
|
||||
|
||||
Suspension Arm Slop
Building up a kit at the moment and as always having mounted the wishbones/hingepins to the car, there is some forwards/backwards play in the wishbone. I've never bothered doing this but do people add more spacers/washers to remove it, or as long as it's not a silly amount is it not too important?
Dave |
#2
|
|||
|
|||
Well, a little front/backwards movement is okay. For me, it should be no more than 0.5mm. I even use o-rings to remove the play because it provide a cushioning effect when it moves.
|
#3
|
||||
|
||||
I always shim, don't know whether it makes any performance difference but certainly doesn't make things worse - in fact on the Durga, shimming stops the hinge pins falling out in crashes.
0.5mm is a rather larger tolerance - I shim to 0.1mm which is the size of the smallest shims in my pack. Parts should move freely under their own weight after shimming. O-rings are a no-no for me as shims as once compressed they cause extra friction, like putting a rubber brake block on the parts. |
#4
|
||||
|
||||
shimage always, shimage,
__________________
Mattys the driver,my names carl
|
#5
|
||||
|
||||
roflmao defo shimage
__________________
Nathan Ralls HPI, Custom Blitz, www.piraterc.com mr-o foams woop woop racing officialy keeping team toe out inline |
#6
|
|||
|
|||
roflol
trekkker |
#7
|
||||
|
||||
that deserves a shimming
__________________
Custom MG-Racing Associated DMS |
#8
|
||||
|
||||
To think I never knew!
Will have to break out the shim bag tonight then! |
#9
|
||||
|
||||
I need to ask Shimmy if he reccommends shimmage or no shimmage, i'll get back to you once i have asked shimmy about the shimmage
|
#10
|
||||
|
||||
Quote:
just check niggs sig line??
__________________
Mattys the driver,my names carl
|
#11
|
||||
|
||||
Shimmy says no shimmage, makes the car very good over bumps
|
#12
|
||||
|
||||
__________________
Schumacher Racing - Reedy - Schelle - TKR - Bandicoot Bodies - MIP - Nextlevelrc - Trishbits - Moss Models |
#13
|
||||
|
||||
Do you need to talk to someone ben?
|
#14
|
||||
|
||||
i think poor ben might need profesional help, i just cant work out if its a shrink or a hitman that he needs to help him with his shimage issues
__________________
Nathan Ralls HPI, Custom Blitz, www.piraterc.com mr-o foams woop woop racing officialy keeping team toe out inline |
#15
|
||||
|
||||
I dont think shimming down to 0.1mm will make any difference in off road, the track is different every lap so you really wouldn't notice any difference in the car.
I know of several superstars who would rather use a sloppy car to a brand spanker |
|
|