|
#1
|
||||
|
||||
Servo saver
Sorry if already been asked, But dose anyone use a servo saver on cat sx,
if so which one ? |
#2
|
||||
|
||||
I have never seen a Cat with one fitted, but a large Kimborough should do it, but it depends if there is enough room under the servo/chassis.
If you have a decent servo it will be fine with out one. If you have a big whack the plastic splines strip and the servo is fine so no need for one really. |
#3
|
|||
|
|||
I run a kimbrough and it works a treat. Never had any problems stripping servos.
I think its the mid size version. Comes with adaptors for the different flavors of servos. |
Thread Tools | |
Display Modes | |
|
|