Go Back   oOple.com Forums > Car Talk > Team Durango

Reply
 
Thread Tools Display Modes
  #1  
Old 21-06-2014
butty1978 butty1978 is offline
Member
 
Join Date: Feb 2013
Location: Barnsley
Posts: 86
Default 210 RTR mid engine

Is there a kit you can buy that contains everything needed to convert the RTR to mid engine and is it easy to do?
Reply With Quote
  #2  
Old 21-06-2014
DynaMight DynaMight is offline
Member
 
Join Date: Aug 2013
Location: Devon
Posts: 238
Default

Sometimes people sell the kit on eBay. It's not an actual kit as such, but basically you need (to convert to the most popular MM4)
TD310238
TD601002
TD310247
TD709033

Buying these bits by part number do work out fairly expensive because if you take TD601002, you only need 2 bearings, but the kit comes with 4. Same with the idler pin, you only need 1. You can probably buy the bearings & shims much cheaper on eBay by searching for the bearing size/dimensions etc.

I paid £12 for all the bits from eBay. You also need a 2x20mm M3 button head bolts.

Everything else comes either already fitted to the car or in the box as spares. It's not that hard to do, just a case of downloading the PDF manual from their website and effectively building it from the manual.

Thanks
Reply With Quote
  #3  
Old 21-06-2014
StuartH StuartH is offline
Member
 
Join Date: Jan 2014
Posts: 65
Default

I bought these of eBay: http://www.ebay.co.uk/itm/2010873617...84.m1439.l2649

All the bits you need that are not in the kit. You then need 2x10 mm screws but that is all.

You can actually make a mid motor car from the bits in the rtr but it will be 3 gear rather than 4
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 08:09 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
oOple.com