|
#21
|
||||
|
||||
Quote:
__________________
B4 5.5 L4 19T RC18t Mamba 9200Kv
|
#22
|
||||
|
||||
Wow...BloodClod....that is one awesome mod there. Amasing craftmanship. Well done.
__________________
X-5^2 :: CR2 :: XXX-T MF |
#23
|
|||
|
|||
i was doing the same and love the aluminum back bone idea.. but could you make 2 and mill the curve of the front side to the curve of the battery and still have the weight far enought back.. and motor movement for gearing.
|
#24
|
||||
|
||||
I admire anyone with the talent and vision to attempt projects of this nature, good on you BloodClod I hope you get it dialled
Quote:
__________________
If you're living within your means you don't have enough imagination. Here's my TC showroom http://www.tamiyaclub.com/showroom.asp?id=18028 |
#25
|
||||
|
||||
A friend of mine made a mid motor Losi as well, and found the problem to be in the front kick-up, which is very different from for example the X-6. After changing this, the car was fantastic.
|
#26
|
|||
|
|||
V-Rossi, what was the kick up changed to... on your friends xxx..
|
#27
|
||||
|
||||
Same as the X-6, after studying the X-6 geometry the solution was the front kick-up, which is different and needed to be changed to the same amount as the X-6 has.
|
#28
|
||||
|
||||
xxx cr mid motor
hi guy, i have just converted my cr to mid motor, it took me 3 nights ,just run it in the street 20mins ago, it worked a treat, im runing 7.5 lrp x12
with the batteries as stock 5 cell + 1 on top at the front of the car speedo left side receiver right as stock, i will be runing at york off road club this saturday night the 2nd of may |
#29
|
||||
|
||||
xxx cr mid motor
pics.. sorry about the quality of the pics i used my phone.
|
#30
|
||||
|
||||
does anyone know the kickup angle on an x6 then?? would be very interested to see what difference it makes on my mid engine b3
|
#31
|
||||
|
||||
Looks a little like this http://www.oople.com/rc/photos/midlosi/
__________________
Jonathan | Atomic-Carbon |
#32
|
||||
|
||||
I dont know the angle, but it could be worth trying to experiment.
Years ago when i had a cougar 2 team, i stripped the front bulkhead- it used to have 2 screws that you add plastic washers in to alter the kickup angle. I was given 2 huge wood screws ha ha that were way to long to at least get me up and running, so un be known to me i just added all kinds of washers and nuts as the screws were to long lol.. I didnt have anything to cut the screws down with. the kickup ended up more or less flat to the ground inline with the chassis, but was solid none the less... first time out with the car, i have more steering at low speed turn in and mid, its was only top end speed that was lagging, but as this was indoors on carpet it was ace. i ended up keeping it as it was lol. Col.
__________________
TRF 501x - Tamiyafied Madrat - Bograt Rc10 FT T4 RC18T Lunchbox Gold X-6 squared Lrp, Novak, Robitronic, Ko Propo, Ezrun , Trakpower ,Team Scream, Demon, Microtech, Dms, Good old Jezza, Je-Spares, Bolton Model Mart, My Feedback http://www.oople.com/forums/showthread.php?t=25199 |
#33
|
||||
|
||||
probably the same as a B4
|
|
|