|
#1
|
||||
|
||||
Advice needed Reedy 410R
I'm having trouble with my 410r ......
I bought it 2nd hand and fitted it into my k1 aero , turn the power on and it will work however it won't brake . I've read the manual on setting it up and even watched a video on YouTube but I still can't get it to set the brakes . In set up mode one flash on green light to set full throttle , 2 flashes to set neutral and 3 for brakes . It won't get passed 2 flashes ( setting neutral ) Getting aggravated Can anyone help ?
__________________
|
#2
|
||||
|
||||
Maybe end points on your transmitter? Can you turn the brake up, if so put it to max and try to re calibrate.
__________________
- Associated B6.1 - - Yokomo YZ CAL3.1 - - JConcepts BJ4WE - - Frankenstein DEX410 - - Schumacher Cougar Classic - - Xray T4 2013- - Tamiya Monster Beetle Black Edition - oOple Trader Feedback |
#3
|
||||
|
||||
I checked my epa and both throttle and brake are at 100% like it says in the manual .
__________________
|
#4
|
|||
|
|||
Have you got any expo on the brakes?
|
#5
|
||||
|
||||
I'm not sure what you mean ?
Im not sure what I did differently but I've managed to get it to set brakes . It's In the wrong default set up for buggies but I have brakes now which is a start .
__________________
|
#6
|
|||
|
|||
My five cents worth...if you are still not getting enough break, also check your pinion size as larger pinions are more difficult to slow down.
|
#7
|
|||
|
|||
From memory some brands of radio gear need the servo reverse switch turning to opposite. Then re calibrate. (It's a vague memory though so I may be wrong.)
__________________
proracing Moss Models Associated Reedy DJ KIRKY |
Thread Tools | |
Display Modes | |
|
|