|
#1
|
||||
|
||||
supastox gearing
what gearing should i be using on my supastox to start with i have a 70t spur but need to get pinions so what should a start with
__________________
Schumacher cougar laydown |
#2
|
|||
|
|||
Motor ???
1s or 2s ???
__________________
Martyn Kyosho | Team Orion | Sanwa | Rudebits | Proline |
#3
|
||||
|
||||
13.5 1cell
__________________
Schumacher cougar laydown |
#4
|
|||
|
|||
A 28 pinion and 70 spur will give you a ratio of 2.50, I would start there.
__________________
Martyn Kyosho | Team Orion | Sanwa | Rudebits | Proline |
#5
|
||||
|
||||
65 to 70mm/rev
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#6
|
||||
|
||||
as mark said 65mm is good to start as it depends on how big your tyres are too so its best to work to the rollout
|
#7
|
||||
|
||||
I actually run at 62mm/rev and was thinking of going down a little. I think a good starting point is just that. It all comes down to driving style as well. I know I lost out last week, because I just couldn't get close enough to the guy in front, coming out of the corner, on power.
|
#8
|
||||
|
||||
i use a 30t pinion on 70t spur approx 67mmpr (track size 30m x 15.5m)
__________________
Website: http://www.wbmcc.co.uk/bingham-model-raceway.html Schumacher Cat Xls, Rc10 Team(retired), Mardave Cobra, SST 98 Rally Car, TT02 Rally car, Wpl-c24 and Element Enduro builders kit #71 #deaddogracing Autocare, unit 5 candleby Court, Cotgrave NG123RT. |
#9
|
||||
|
||||
Is 31 pinion 68 spur ok
I'm on 1s 13.5 thunder power 49.6 tyres With a 71.04 rollout, Gear ratio 2.19 Track is 1 long straight and the rest is winding. This track but will be slightly different. https://www.youtube.com/watch?v=uEqu...e_gdata_player
__________________
racer for life http://www.youtube.com/user/dooronron69 https://www.facebook.com/pages/Torba...44601622232368 www.actionmodelcentre.co.uk www.rcmodelimports.co.uk R.I.P www.gpmracing.com.hk my feedback: http://www.oople.com/forums/showthread.php?t=69066 |
#10
|
||||
|
||||
Quote:
No more Drop 1 pinion go from there
__________________
RC OCTANE Schumacher Cougar LD2 Lrp Eds Sworkz 35-4n Alpha dragon |
#11
|
|||
|
|||
Basic gearing.
Hi there, ive just got into the world of 12th superstox/mardave etc and im just wondering what gearing to start with. Im running the 70 tooth spurgear, and at the last meeting in used a 30tooth pinion, but it felt a little slow but the motor was only 'lukewarm' when it came off the track after each heat. Im using the basic standard 'Silvercan' brushed motor and a 1s lipo. Im racing at Dudley indoors on carpet, and id say its a relatively small circuit due to being in a school hall. The tyres ive currantly got are at the limit and about 43mm dia, but i have new tyres to true up once i know whats the best size to go to to start with?
Any help will be appreciated. Lee |
#12
|
||||
|
||||
A couple of nicad packs would be better suited to silver can brushed sue to the higher voltage, it will feel flat with your combo I'm afraid.
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD |
#13
|
||||
|
||||
Gearing
If you run on a tight track with lots of corners go for a 28t pinion with a 70 spur. With a long fast track, a 30t is more suited.
|
|
|