|
#1
|
|||
|
|||
what BL motor and ESC setup for EMB-1
as per the title, its my first micro so Im not after ballistic mach 9 performance, trying to keep it affordable and reliable.
thanks
__________________
AE all the way RC10B6.1d Maclan powered RC10T6.1 Maclan powered RC10B74 Maclan powered #rcoctane #teamrcoctane |
#2
|
||||
|
||||
Quote:
Losi/Carisma (both same different packets) 4500kv motor. All in all the com o will be around £40. If doing nationals, same Speedo but get the 6800kv motor for the long straights. If you do follow the above advice, dint use the kit emb opinions as they won't fit on the shaft, once again buy the losi/carisma ones for a few quid each. Also visit www.microrcracer.com as it's a dedicated site for all micros |
#3
|
|||
|
|||
thanks will go browse them items
Tony
__________________
AE all the way RC10B6.1d Maclan powered RC10T6.1 Maclan powered RC10B74 Maclan powered #rcoctane #teamrcoctane |
#4
|
|||
|
|||
Tony the LC can use a slightly larger motor can the Carisma so I'd go for this from Craig Harris at Thumbs Designs
http://thumbsdesigns.com/product/leo...order-special/ The kit pinions for the LC will fit on it too! Hobbywing 60 amp ESC will be fine although most of the top drivers are using the extreme stock below http://thumbsdesigns.com/product/hob...sc-blue-60a-2/
__________________
Current rides: Team Associated B6.1 Kyosho RZ7 Kyosho ZX7 All kept going by PBM Racing |
#5
|
||||
|
||||
Hobbywing 35amp speedo with the LC kit motor LCL6048 will do the job.
__________________
|
|
|