|
#1
|
||||
|
||||
Mta4 Conversion time
I got hold of an mta4 a while back when model zone was closing down never ran a nitro before and after fiddling around with it for a bit I never want to run one again!!!
I quite like the chassis and was looking into converting it over to electric but totally don't know how to go about this!!!! Been googling for a little bit but nothing of any help their Just looking for a bit of advice on where to start really what parts need to go and what needs to go in its place I'm thinking I need the obvious motor esc combo and battery of course but its the mounting of the thing and the type I need for it Cheers in advance for any help even if its don't bother its a stupid Idea!!! |
#2
|
||||
|
||||
Hi there, I converted my mgt/mta to electric, having run it in its original guise since '04. Did you have the .28 version? I ask.as these weren't exactly Thunder Tivers finest hour, alas, I digress.
I made my own parts and improved on it as my experience grew. I have since converted my LST2. I have since shelved the mgt since the esc let go and consequently made the lipo, the 6s lipo go pop too. If you utube for my "21ccFilms" channel, I have 3 short vids on there for you to have a nosey at.
__________________
Answer RC SWorkz 35-3 SWorkz 350T SWorkz S12-2 Instagram: crazylthirteen Blogger: http://the-croucher.blogspot.co.uk/ |
#3
|
||||
|
||||
Ace cheers I will check them out later at home my works computer has a block on YouTube!!!
I do have the .28 version I'm guessing from what you said this is probably a bad thing? I have also heard that the gear box in this version isn't the best for taking brushless power!!! |
#4
|
||||
|
||||
those vids looking good!!!
Cheers for that its given me an idea on what to do think I'm going to ditch the stock transmission heard its pretty weak anyways and start collecting bits ready to convert |
#5
|
||||
|
||||
A friend of mine found this on ebay
http://www.ebay.co.uk/itm/mta4-mgt-c...item1c3a91912c comes with a diff!! |
|
|