|
|
#1
|
||||
|
||||
Heat-Problem
hi guy's
i run a fantom 10x2 checkpoint can with ib 4200er shv cells and a sphere comp. in my yoke, as you can see on the pic i cool my esc with a fan and cut the holes to cool the motor. i have it geared with the original spur gear 84t and a 14t pinion. i diden't those prob's with the xx-4, why do i get them here? is my gearing wrong or what? i don't get it. what do you guy's mean? Greets Marco
__________________
2x xxx-BK, xx4-we, 2x MR4-BX, TC3 |
#2
|
||||
|
||||
I dont have the car anymore so its been a while, but you sound way under geared to me. I dont own anything like that sort of pinion so I was running around 20t on a 11x1 (from memory) and it was fine.
Someone will jump in who actually runs the BX and help you more than I can, but your motor would get very hot if you are undergeared. |
#3
|
||||
|
||||
Just a thought, you dont actually say what the problem is, just that it is heat..
If it is the ESC then that could be something else. I have run the sphere with a 3* and it was fine, I ran it with a 10x1 brushed motor and it thermalled out on me. |
#4
|
||||
|
||||
Yokomo gives a 17t pinion with the kit expecting people to use 10x2, 11x2 motors so I would guess you are way under geared. I run a checkpoint 9x2 in my BX and I use a 16t pinion with no issues.............
|
#5
|
|||
|
|||
Bathy uses 17 or 18 in his cars. They don't get stupid hot, but still have plenty of beans!
|
#6
|
||||
|
||||
Is your tranny free enough ?
I have read that belt tension is too high with the stock settings. |
|
|