|
#4781
|
|||
|
|||
That's the thing, even with a lock nut as soon as I hit the brakes it becomes loose again. How do you other guys lock the one way ? I even turned the lock nut so that the rubber side is closer, still no luck.
|
#4782
|
||||
|
||||
Quote:
Mvh isobark |
#4783
|
|||
|
|||
There is already a washer and a locknut. And it still loosens. Even BITD it was the same. I always drive with the one way free. But now I want to full time 4WD with brushless.
|
#4784
|
|||
|
|||
|
#4785
|
||||
|
||||
How much movement is there on the layshaft? May be better if theres none as the current manual layout does have slo. Maybe some wafer thin washers on the layshaft that sit between the bearing a chunk on the layshadt may resolve it
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#4786
|
||||
|
||||
i rang fibre-lyte and spoke to stephen and he was unsure aswell, this is what i got instead of the hoop design
|
#4787
|
||||
|
||||
Rob, Apologies had two weeks of hell with things but the towers pictured on their website so why did they send that? Still it looks nice never the less. Do you want me to call on monday and find out whats going on,
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#4788
|
||||
|
||||
hi james, its ok i worded my post wrong, what i meant is i had this tower made instead of the hoop design tower, the one i got is the one i wanted
|
#4789
|
||||
|
||||
Are Fibrelyte starting to get on top of things again? I have started building the gearbox for the tub I ordered
__________________
___________________ Maxxum FF Ultima Pro Turbo Optima Mid SE Turbo Optima Mid SP Optima Mid Custom Special Lazer ZX Lazer ZX-R Lazer ZX-S |
#4790
|
||||
|
||||
Alcyon where did you get those gold kingpins on your Lazer?
__________________
___________________ Maxxum FF Ultima Pro Turbo Optima Mid SE Turbo Optima Mid SP Optima Mid Custom Special Lazer ZX Lazer ZX-R Lazer ZX-S |
#4791
|
||||
|
||||
i had no issues, i ordered the shock tower on a tuesday and they arrived in the post thursday .
|
#4792
|
|||
|
|||
They came with a used optima mid. I think its made by cross or gpm.
|
#4793
|
||||
|
||||
Ok great, also good design but as per my tests on similar designs i would go one mm thicker if using a fast motor.
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#4794
|
||||
|
||||
Thinking outside the box is whats needed. If you have a thrust or bearing between the two pulleys may be the reason. If you have thrust id opt for the solid bushing and lock tighting the nyloc nut on tight back to front or if you can find a wasp solid layshaft get that.
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#4795
|
|||
|
|||
I'm still waiting to hear back from Stephen about the tub I ordered too, last time I heard from him was about 2 weeks ago. I don't want to hassle them cos I know they were short-staffed but how long does it take to reply to an email
|
#4796
|
||||
|
||||
Stephen said he has answered all emails in his inbox so is possible he didnt receive it. Could yoy email it again plus let me know so I can let him know. Cheers.
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#4797
|
||||
|
||||
Wouldnt be my one?
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#4798
|
||||
|
||||
Indeed it is just need to build the diffs and it can go together permanently, this will have the blue belts as it will be a shelfer. I am putting a NIP LAW-12 in it. The tensioner I got from you is going on my second used vintage twill weave tub, part of my order with Stephen is some twill weave parts for that project
I have sent Stephen a few emails so I don't want to send any more I am sure he will answer when he gets a chance though I need some of the parts soon as I am building a modified ZX-R for a friend as a Christmas Gift all the parts for that and three other projects are being anodised at the moment I really need to get onto my Ultima project ....
__________________
___________________ Maxxum FF Ultima Pro Turbo Optima Mid SE Turbo Optima Mid SP Optima Mid Custom Special Lazer ZX Lazer ZX-R Lazer ZX-S |
#4799
|
|||
|
|||
Quote:
Sure thing, I'll email him now cheers James Ok just sent over another email and my previous email was on the 21st of August. The last email I have from Stephen was on the 12th of August. Rich Last edited by kek23k; 15-09-2014 at 01:58 PM. |
#4800
|
||||
|
||||
I decided to send another email too ...
__________________
___________________ Maxxum FF Ultima Pro Turbo Optima Mid SE Turbo Optima Mid SP Optima Mid Custom Special Lazer ZX Lazer ZX-R Lazer ZX-S |
|
|