|
#1
|
|||
|
|||
HELP!! Cant find any dogbones!
Hey guys, just wondering if anyone knows of any micro dogbones around 50mm in length, 43mm is the stock length of rc18t dogbones, the ones which came on my clone are 50mm and much much better fit than any of the real ones, but i cant seem to get any, i have a real rc18t now and i'm using my the clone dogbones but their just about warn out...
so... now my question, could you guys measure the dogbones off your xrays, blazes and any other micro using dogbones? it would be a real help thanks alot guys, i know you'l help asmuch as you can |
#2
|
||||
|
||||
I ran RC18's and the stock bones are fine, BUT there's a spring in the diff half that keeps the bone engaged with the axle, if this is missing then the bone will slip and seem like a poor fit
__________________
Mark Dyson Clown |
#3
|
|||
|
|||
problem is i'm running flipped rear arms, if i fit the stock dogbones they dont physically fit... their only in the diff cups by about 1mm... i've already trashed 2 sets of outdrives with poor fitting dogbones... i really need some longer ones...
|
|
|