|
#1
|
||||
|
||||
B44 Screws And Wheels?
I'm collecting mine on monday. The suspense is killing me. Are the screws imperial? Are the front wheels the same hex size as any other car out there or unique to associated? Hope your all enjoying yours!!
__________________
PBM Racing 01773 769323 TEAM XRAY RC DISCO |
#2
|
||||
|
||||
main drivers, 1/16", 3/32" and .050" +2mm for ball studs
wheels b4 or losi rears are ok and Losi fronts fit but the hex on the AE looks deeper.
__________________
|
#3
|
||||
|
||||
Cheers matey. Trying to find out all the titbits before I build it.
__________________
PBM Racing 01773 769323 TEAM XRAY RC DISCO |
#4
|
|||
|
|||
also the two nut drivers for the shocktower nut and wheel nut.
also need a 2.5mm ball driver for the motor screws and a 1.5mm if you use metric pinions.
__________________
To Finish First, First you must drive fast |
#5
|
||||
|
||||
Better fronts
The associated fronts will be stronger than the losi fronts used as they have deeper hex's and made my proline to be a abit stronger so ive heard seen a fair few losi fronts had stripped hexes at my club last saturday
__________________
Custom MG-Racing Associated DMS |
#6
|
||||
|
||||
|
#7
|
|||
|
|||
the B44 front wheels have a deeper hex and a wider hex on the axel.
it is possible to use a Losi axel hex and use Losi front wheels if you want. the car will be fractionally wider if you use Losi wheels (front) with the B44 hex, but this might still be legal using UK tires like Schumacher or Ballistic Buggy. |
#8
|
|||
|
|||
After having a brief look through the kit, I don't think that the wheels included are made by Pro-Line.
My guess, as they are a brand new design is that they are made 'in house'. |
#9
|
||||
|
||||
Eitherway they are better than the Losi fronts like most things are
__________________
Custom MG-Racing Associated DMS |
|
|