Go Back   oOple.com Forums > Advertisers >

Reply
 
Thread Tools Display Modes
  #1  
Old 02-04-2014
Darren Boyle Darren Boyle is offline
oOple Advertiser
 
Join Date: Jan 2008
Location: Watford, Herts
Posts: 4,501
Default XFactory UK X6-S

The wait is over....... Introducing the X6-S 2wd shaft driven off road buggy conversion from X-Factory UK.
The X6-S has been designed for today’s ultra high traction Astroturf and Carpet type tracks. Featuring a motor position further forward than traditional mid motored cars for better stability and a sharper response.....
The X6-S is based on the popular X-Factory X6 Cubed front end but utilises the rear suspension and drive train from the trusted B44.2 platform. Featuring a lightweight “CarbonFlex” chassis for both rigid construction and strength whilst retaining the all important controlled flex for consistent bump handling. Carbon fibre multi-layer front top deck system combined with a new carbon fibre rear top deck designed to optimise flex and provide easy access for slipper adjustment.




Designed to use “shorty” type LIPO batteries, resulting in a superb weight balance both front to rear and left to right.
Two servo mounting positions and rear mounting locations for added ballast to enable easy weight distribution tuning.

Antenna mounting locations on both the left and right of the car to suit multiple receiver positioning.
The X6-S is being sold as a conversion kit and will be available in two versions – Level 1 and Level 2.
The X6-S Level 1 kit will include the parts required for someone who already owns an X-Factory X6 Cubed, leaving them to source only the B44.2 rear end and centre drive parts required to complete their model. The Level 1 conversion includes the “CarbonFlex” main lower chassis, front carbon fibre side decks, front carbon fibre upper top deck, rear carbon fibre flex top deck, carbon fibre battery strap, X6-S logo vinyl pre-cut decal sheet, set up sheets and instructions.
The X6-S Level 2 kit is aimed at a racer who does not already own an X6 Cubed and includes everything from the Level 1 kit, as well as the following items; Graphite molded nose piece – Alloy front top deck supports – Carbon Fibre nose bridge spacers and stiffeners – Plastic wing mounts (X-Factory) – Carbon Fibre 4mm “multi mount” rear shock tower* – Alloy chassis top deck posts – Alloy battery posts – Carbon Fibre antenna mount – Alloy top deck spacers – Clear lexan bodyshell and wing with window masks (AE Parts not included in either kit)
* “Multi Mount” rear shock tower features multiple wing mount positions to accommodate mounts from X-Factory, Associated (B44), Schumacher or JConcepts (C4.2 or B44)
The Multi Mount rear tower is included in the Level 2 kit and will be available shortly as a spare part as well as for all Level 1 owners.
The team have been running the prototype cars during development recently and have already produced some great results....

Kevin Hunt too TQ and won the 2wd A final at the HNMC Winter series round 6 at Ware, and he also finished a fine 3rd place overall at the Silverstone Astro Masters final round in an A final packed with F1 grade and other factory drivers, Ed Kerry qualified and finished 2nd overall at the “Triple Crown” final round at Faversham and both Dan Greenwood and Kevin Hunt ran the cars at the BWOC event held at Silverstone both producing excellent results also.......
DMS200 – X6-S carbon fibre shaft drive chassis conversion kit – Level 1 – UK RRP £109.99
(pre-orders being taken now – expected release date week commencing 7th April)
DMS201 – X6-S carbon fibre shaft drive chassis conversion kit – Level 2 – UK RRP £179.99
(pre-orders being taken now – expected release date week commencing 21st April)


__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER
AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF
AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI
X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ
TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ
Tel : (01923) 816636
Reply With Quote
  #2  
Old 08-04-2014
Darren Boyle Darren Boyle is offline
oOple Advertiser
 
Join Date: Jan 2008
Location: Watford, Herts
Posts: 4,501
Default

Instruction booklets arrived today, the final piece of the jigsaw which means that the first batch of X6-S Level One kits shipped out this afternoon......
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER
AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF
AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI
X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ
TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ
Tel : (01923) 816636
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:01 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com