|
#1
|
|||
|
|||
Carbon cutting?
Can anyone point me in the direction of a good carbon fibre Cnc machinist have tried fibrelyte but they are flat out busy
Cheers James
__________________
|
#2
|
||||
|
||||
PM sent
__________________
Yokomo BMax 2 |
#3
|
|||
|
|||
Hi Jlucas,
I presumed you got sorted out with someone? If not we cnc machine carbon and aluminium components You can see some of the bits we do on our website. www.sos-mmrc.com Happy to do custom work as well
__________________
Always ready for racing - www.sos-mmrc.com |
#4
|
||||
|
||||
Do you do the drawings or just the cutting?
|
#5
|
|||
|
|||
carbon cutting
We can do any drawing work required aswell. Drawing work would be a one off charge.
What are you after?
__________________
Always ready for racing - www.sos-mmrc.com |
#6
|
||||
|
||||
I need a few pieces to reinforce my camera gimbal - I need 'QUALITY' carbon fibre that's stiff and strong - cutting to my designs. They aren't huge but something like 1.5 or 2mm carbon fibre would be perfect.
If someone can cut this for me it would be great - if you don't have top quality carbon sheet then I'll buy some to get cut. Someone give me a shout! This is for a helicopter with 1800 quid worth of camera hanging off it - I don't want it to fall apart
__________________
If your PM doesn't at first succeed - try, try again. I'll reply in the end, honest. |
#7
|
|||
|
|||
|
#8
|
|||
|
|||
HI Jimmy,
We could certainly help. sos-mmrc.com and current thead on some new bits and pieces were developing http://www.oople.com/forums/showthread.php?t=146056 We use 100% pure carbon fibre in mix of 3k and 6k weave at 0 and 90 degrees. Made in Germany from Japanese Fabric. It has a satin finish as it has a higher carbon/resin content ratio than much of the full gloss carbon you see available. Also we would really like to get a Club forum on your lovely site pretty please
__________________
Always ready for racing - www.sos-mmrc.com |
#9
|
||||
|
||||
Without slagging anyones carbon off - yours looks quality stuff. Do you have 1.5mm thickness or there abouts, or can you make it? I just need it to stiffen nylon parts so it would be IDEAL if you could help me out. This is for my camera gimbal and I think the nylon will be too wobbly in a couple of places without some bracing.
Drop me a mail jimmy at oople and I will sort out your club forum also. And remeber like my signature - if you get no reply, keep trying Many thanks Jimbob
__________________
If your PM doesn't at first succeed - try, try again. I'll reply in the end, honest. |
#10
|
|||
|
|||
Well thank you very much!
Cheers Jimmy. We work hard (for virtually no return) to produce the best components we can so it's always nice to hear people appreciating the work.
I'll PM you now(and later) regarding your parts and getting the Club section sorted.
__________________
Always ready for racing - www.sos-mmrc.com |
Thread Tools | |
Display Modes | |
|
|