|
|
#1
|
|||
|
|||
LRP Flow for 2wd offroad carpet
Hi folks,
Which firmware do you guys use for 2wd offroad on carpet? Still v3.8? Also, what is a good base setup for such a scenario? |
#2
|
|||
|
|||
I use the 3.8 version with blinky settings. Br2 brakes with no drag brake and dial down on the transmitter. I find any other brake setting and its either too aggressive low rpm and no high rpm or vice a versa.
|
#3
|
||||
|
||||
I run v3.8 on 3-2-2-2-0-0-1. Take torque boost to 2 if you need a little more punch
|
#4
|
|||
|
|||
Many thanks for the reply guys.
Much appreciated! |
#5
|
|||
|
|||
One question...all these settings are always done with brake EPA set to 80% as recommended by the manual right?
|
#6
|
||||
|
||||
I've always set my epas to 100% before setting up my esc. Then adjust from there to suit requirements.
|
|
|