|
#1
|
|||
|
|||
Rear toe inserts
Here is a link to some rear inserts we have been working on for the s104 evo that increases rear toe in and very slightly reduces the anti squat. This helps lock the rear end of the car in on both high and low grip making it easier to drive.
http://www.shapeways.com/product/BCS...ionId=58925207 Last edited by spennyy2k; 01-02-2016 at 01:20 PM. |
#2
|
||||
|
||||
Could you do one for the 2wd so we have zero toe in on the rear? Maybe a good idea to have zero, 1, 2, 3 & 4 options
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS Last edited by Welshy40; 09-02-2016 at 06:43 AM. |
#3
|
|||
|
|||
leave it with me ill have to have a look at the car as i dont have one, will be a week or 2 until i can
|
#4
|
||||
|
||||
what are the actual options with these?
Do they need to be run as a set of 4? if not, do they go in the front or the rear holder
__________________
Stephen Smith Answer RC Team HB Racing | Team Orion | Xpert | Racing Experience |
#5
|
|||
|
|||
for best results run all 4 in the RR and RF hanger, ive not got the exact figures to hand but its about 4deg of toe in and 1deg anti squat
Last edited by spennyy2k; 04-02-2016 at 02:38 PM. |
#6
|
|||
|
|||
I've been running the 104 EVO for a good while now and have been testing these inserts. I have found the car to be better with as little anti squat as possible. It makes the car alot better through the bumps and jumps and keeps the car flatter in the corners. Also on slippy tracks, the xtra 0.5 to 1deg rear toe helps lock in the rear end and makes the car easier to drive harder! With these inserts you can also widen or narrow the track width. You can also use them in the front of the car, again to run a wider or more narrow track width. There a great tuning option.
__________________
CML - AE - Hobbywing - Answer-RC - RossMod |
|
|