|
#1
|
|||
|
|||
xx4 one way
hi,
ive got an alli xx4 one way lesro apex whoever makes them with xx4 pulley fitted,what will i need to make it fit the x5, just ordered the x5 squared conversion, thanks trekkker |
#2
|
|||
|
|||
Stuart,
You will just need to change to the X5 pulley as it has one more tooth and you will be away!! E. |
#3
|
||||
|
||||
If it's a Lesro one just ring Daryl and He'll know.
If it's an Apex one it will have to be modded as the flange on the XXX-S was much bigger so it mas to be machined down.
__________________
Nortech is ACE! |
#4
|
|||
|
|||
its a fit for a xx4,
got it off ebay, so just change the pulley, will the x5 pulley just fit or will it need modding thanks trekkker |
#5
|
||||
|
||||
Hi Trekkerkk,
I'm affraid you will first have to increase the center diameter of the X-5 diff pulley and then decrease just a little the flange because the XX-4 front diff pulley inside diameter is larger than X-5 diff pulley inside diameter (that's the mods I've made for Antoine's one-way)... Hope my English is clear enough Olivier |
#6
|
||||
|
||||
Hi Olivier, your English is better than most of ours!
I have created a word document with step-by-step instructions for how I alter the XXX4 Apex/DCR one way to fit the X-5, I can email this to anyone, but it may be different to the XX4 specific diff, I haven't had one of these to compare. Chris |
#7
|
|||
|
|||
thanks to all for the info,
trekkker |
#8
|
||||
|
||||
Quote:
Please to see you again next week Cheers |
#9
|
||||
|
||||
Oh we'll be there probably tea time on Wednesday, I hope the rain doesn't follow. See you there.
|
#10
|
|||
|
|||
You can take the rain Chris, please do. I don't want to get wet at the F1GP @ Silverstone. I remember the car parks from a few years back... not good.
|
#11
|
||||
|
||||
a bit boggy?
|
|
|