Conversation Between weeman and blue_pinky
Showing Visitor Messages 1 to 2 of 2
-
So, the chassis will hit the floor before the suspension bottoms out, there are no limiters to stop this from happening and that is quite normal!
There shouldn't be anything protruding below the chassis at the back so the only thing that should happen is the chassis will very slowly scuff and wear...but to be honest, other than running it on concrete, normal track surfaces mean you don't really get any significant wear issues at all....nothing out of the ordinary anyway.
The worst thing that's happened to mine so far is the back corners of the chassis look a little rounder and softer and the black screw heads for the rear toe-in block have rubbed themselves silver!
Nothing to worry about by the sounds of what you've described.
-
Hi Andy..its Dave
Quick Q for ya... O's x6sq with losi shocks, e speedhangers...The underside of the rear chassis hits the floor if pushed fully down..The little rectangular stub on rear..Is this correct for an x6?More to the point will it break off under jumping bottoming? Does yours do this?
Cheers bud