Adam Skelding

Hi mate. I was told that you might know where There maybe a 210f and 210v2/v3 available. I know Durango are gone but I was told that you may know of someone with old stock. Many thanks. Ade

Hello i was just looking for bait of help if that is ok ? I have a dex410 v3 and have noticed that my wishbones have a very small amount on wobble where the hinge pins goes through. It is only a small amount but you can notice it when holding the wishbone near the diff and pushing it back and forth.

Is that normal? I have all the spacers installed correctly and everything is tight.

Also there is a small amount on play in the caster blocks, they can also be wobbled back and forth when i hold the wishbone near the hub end and plus them back and forth. again the correct spacers are installed and everything is tight.

I guess this is completely normal but though i would check just to put my mind as ease.
Thanks
Harry

hi, who do i speak to about my account

Hi Adam I've just got a 210 is there anything extra worth buying for it I.e hop ups that will either strengthen it or aide it's performance or do I just run it from kit standards.
Regards. Deano

Hi Adam
Hope you can perhaps help shed some light on a problem I have seen with my new dex 210. I have noticed when the front wheels are at full lock and you let the servo centre the steering knuckle and ball cup jams or stick for a moment creating a very iratic steering arc. I have checked the end point on the servo so that there is no strain and it pulls the wheels nicely. Do I need to use full lock on the car or can I back it off. Any suggestions. Please help
Thanks

Hi Adam.
Andy Bate here. FORCC Snr Member and D4 stalwart!
By chance and unless there is another Adam Skelding. I have just bought your ebay Speed passion GT Pro esc!!
Hope You and your racing are well.
Regards Andy
4ndyb4te

Nice 1 for you help. Ky :-)

Hello. I would like 2 stick pack lipos please. RSVP. Chris.

Adam,

Can you come online on MSN messenger so we can talk durango please

Jarred.

Hi mate, have you got any pics of the sp install in your car please??