Lipo S4
 

Well it all fits just need some battery strap now :thumbsup:

sorry about the poor quality photos

Looks cool to me will the speedo mount on the small piece of carbon fibre behind the spur gear?

A

O yes & fits behind the front screen in the shell!

Cool

A

is it prepped for worksop by any chance :D

Are there any bits of my car leftover :woot:

It looks spot on :thumbsup: and with the b44 slipper in there, will increase the reliability of drive train as well.

:D might be!

[quote=OldTimer;156142]Are there any bits of my car leftover :woot:
quote]

:eh?: Not much is just a pile of bits at the min! :blush:

you ready for s4lipo 2 over the winter m8;):thumbsup:

If it all works ok Ill see what I can do :D

I went an ordered Maxamps because of the Trakpower dimensions listed on their website. After seeing the above, I managed to find someone with Trakpower saddles and measured them. They are not 47mm as stated on the website, they are a nanometer above 45mm. Which....is the exact distance you need to squeeze the above in with a B44 shaft. :eh?:

I would rather not change the whole drive section to a B44. It's not so much cost, but I haven't had any problems with a BJ4 one, and if I am really honest - downright laziness.

Does anyone have any bright ideas on extending the "thinner" B44 drive to save switching the whole drive shaft assembly to a B44 one?

or....Maybe know someone that will make a bespoke one, perhaps extend the cups somehow? For us lazy people, we would spend about £30-£40 just to save on the hassle:thumbsup:

Nice one mat :thumbsup:

Looks ACE...Hmm, maybe i have to order a new S4 car :D..and CNC off the bat slot on that one :D..i do have aBJ4WE just on my table :D

New shafts are an option im sure mip could make some although I have someone else in mind to ;) ultamitly I want to use the B44 slipper unit & get some new prop shafts made! I just wanted to make sure it all works first!

Ben, mine works fine just waiting for the lipo's to get here and i will get them fitted.
The B44 slipper works well, and if need be i could get that fitted for you as mine only took me 2 or 3 hours.
Paul.:thumbsup:

Hi Mat.
Are you going to be at F3/4/5's? if so please bring it along for a look see.

yes mate ill be there :)

What are the Part Numbers for this mod?

http://www.m-k-racing.com/product_in...oducts_id=5034

Would this be all i would need?

:eh?: Anyone ?

Sorted :o:woot:;):D:p