lipo troubles
 

right i have just ordered myself a hk eco6 charger but i was wondering how can i balance my batterie as i cant seem to see the connecter in the box of connecters i need a pin style connecter to use to balance charge it :/ can someone help me out ?:(

Hi there

What make of lipo are you trying to charge?

Michael

You will probably need to order a seperate balancer lead. Lrp do one which is what I use.http://www.m-k-racing.com/product_in...5f990757e9e04e

i am trying to charge a trakpower 3800mah 35c 2s lipo in a gold case so yeh i need to invest in a balancing lead but will just see when the charger gets here :thumbsup:

I have just the lead you need. I bought it for my trakpower lipo but don't have it any more.

I will bring it Friday

Hope that helps

Ta Michael

thank you very much Mickie ill try and get down this Saturday thank you very much your a life saver :thumbsup:

pissed off ==
 

quite pissed of just received my hobby kind eco 6 charger and for the life of me i cant seem to find a 12 volt power supply in my house :l

Rather than slag each other off, couldn't you just make some constructive comments or ask for ideas...

Do you have a printer, laptop, or other similar device that has a 12v power requirement? they often have a power supply you could use, albeit at a lower current ....
or a car parked on the drive you could 'borrow' a 12v battery out of?

Have you got a dead computer laying around anywhere? If so, the power supply in that can be used with a bit of modification:

http://www.wikihow.com/Convert-a-Com...b-Power-Supply

All the bits can be had from Maplins or RS and will be a good project if you're not doing much at the moment.

Or you could do a google seach for Fusion 100w power supply, available for less than £20 and with 8 amp output is ok for charging lipos as you wont need anything near that.
If you are stuck for Friday, I'll bring my Ripmax dual output (available for about £50)