Help with my transmitter!
 

Hi guys

I'm getting back into RC - bought a Cat K1, and corresponding Core-RC receiver / transmitter.

Everything is plugged in correctly, but to make the car drive forward I have to pull back on the throttle stick - not push forward.

Am I overlooking something stupid here - i'm running brushless and all my motor cables and sensor cable are wired up correctly?

Sounds like all you need to do is to Reverse the throttle on the transmitter, can't remember how to do it but it will be in one of the settings. After you have done this forward will be forward. Hope this helps

If you have the LCD version:
press enter to enter the menu system
press +/- to move up/down to menu item 4 "Rev"
press enter to select this menu option
press enter to move across to "TH" throttle
Press +/- to change from Normal (NOR) to Reverse (REV) or the other way if it is already reversed.
Press Exit until you are back out of the menu