Supastox setups thread
 

Moderators, I don't see a Supastox setups thread on here so perhaps this could be it and it could be made a sticky?

Next question, if anyone with the diff fitted is reading this, do you need to break it in the same as you would a buggy or TC diff? And how good did you find the stock setting?

Thanks for adding me to the FB group Mark, looks like a good knowledge base!

If you look in the files page one of the group members has put all the tips for building a sss into one document

Here's mine from the Teesside National:

Front:
6 deg static castor; 1 deg camber plate; red springs; servo up; zero toe; Mi5 front pivots, no O ring dampers; Contact 50 tyres with superglued sidewalls; 1mm droop.

Rear:
Yellow springs; no O ring dampers on links; Schumacher diff wide setting; kit links; Contact 37 tyres; 1mm droop.

Body, Kamtec Ascari, large rear wing set back; Reedy Sonic MachII motor on 70mm/rev; Futaba 9650 servo; FRSky receiver; HW v3.1 1S speedo; weight 964g.

If there's any other setting I've missed, please ask.