Team C x202c ( ansmann x2c)
 

Now on Ebay


Item number: 290581737163




------
Quick description of car

This is the Team C X202C , same as the Ansmann X2C
Well looked after car, bought from Team C, about 6 months old, used indoors and at Taly this weekend
Diff rebuilt with new out drives, Diff plates , Idler gears after Taly National
All screws are liked new and car is fully cleaned, really good example and looked after. Few marks on front bumper and under side of wishbones from use.

Please note that this is for a rolling chassis and you will need to add your own electric and battery gear to make this work.



Sorry will not split
Any Questions please ask.

Car comes with many spares, almost enough to make a second car.
As well as the spares listed below the car also comes with sticker sheets manual and kit box+

A used full set of yellow mini pins fitted to white wheels and donutz inserts


Fully ball raced- including steering rack
Full titanium Turnbuckle kit
RC Lazy ceramic Diff Balls
Alloy shocks fitted with: drilled custom pistons, longer shock shafts for more extra droop bleed holes on shock caps and blue MIP super smooth o rings
Alloy +1 deg optional toe in hubs
CVDs for b4 Rear wheel conversion
Rear wing mounts drilled for 2mm allen screws (no body clips needed)
Alloy motor mount holder
Alloy front hinge pin brace
Alloy wheel hex with capture grub screws


Option parts with car
Original CVDs for 12mm hex wheels
Graphite battery bar for saddle chassis
Saddle pack conversion chassis with motor slot cutting( used for 6 months- has sing of wear and scuffs)
Shell for saddle chassis( bit used now and could do with replacing)

Custom rear anti squat block for extra anti squat settings
Custom rear camber link extensions ( shortens inner camber link pick up)


Spares with car

Kit tyres, brand news still in original bag
Kit front hubs and steering arms still in original bag
Kit Full steering assembly still in original bag
Kit Servo blocks and servo horns still in original bag
Kit Full Turnbuckle and rod end assembly still in original bag
Kit rear hubs still in original bag
Kit shock ride height spacers in original bag
Kit front bulkhead camber plate and bumper still in original bag
Kit wheel hex and locking wheel screws still in original bag
( all above are left over’s from brand new Mad Monkey) kit

BNIP ( all listed below are spares that are not from a kit and include header cards)

Ansmann front shock stay mount no#12500418
Ansmann upper suspension arm holder front no#125000414
Ansmann spur gear 52t ( diff gear ) no#125000403
Ansmann shaft spacer no#12500040 x2
Ansmann spur gear 28t (idler gear)
Ansmann Motor plate x2c no#125001117
Ansmann 21t pinion
Ansmann Differential right/left x2c no#125001116
Ansmann Suspension arm front no#125000415
Ansmann rear hub carriers n0#125000412
Fastrax m3 nylon nuts

Removed from bags but never used
Front upper nose plate
Front bottom kick up nose plate
Front wishbones
Front shock tower
Rear wishbones x3
Kit CVDs
Diff Gear 52T
Wing mounts
Rear hubs
Shock spring bottoms x8
Wing spacers

Used spares included

X2 top shafts
Diff gear 52t