b44.1/b4.1 question
 

just a quickie here just wondering what tools i need (hex drivers/nut drivers) to build and maintain my b44.1/b4.1 havnt decided which yet and with regards to the b44.1 what length of sensor wire will i need.

james

Hex drives needed for a b44 are 0.50, 1/16, 3/32 & 5/64, probably the same for a b4 as both cars are imperial
Can't remember the nut driver sizes
When i had mine i used a 8cm sensor cable but it was a very tight fit so maybe a 10cm one would be better

but are the b44.1/b4.1 still imperial? or have they gone metric?

james

Still imperial :D

thanks mate for clearign that up.


anyone know the nut driver sizes for the b44.1/b4.1?

james

Nut drivers:

3/16" for the small lock nuts and the small plastic nuts on the shocks.
1/4" for the b4 slipper and large size 4-40 nuts.
11/32" for the b4 rear wheels and the front and rear wheels on the b44.

MiCk B. :-)